dslrdashboard.info

Hi Zoltan,

I'm very happen: could connect to my NIKON D810 and enjoyed wireless remote control via MR3020 on qDD. Just for your information I'll attach last system log.

Thanks again for your great support and your patience. Is there any way to support your project by donation or something like this?

I connected DSLR to MR3020 - not recognized see system log

Network Button qDD showing IP 192.168.1.1 and port 4757 as shown in scrennshot

Connection not possible

Affirmative: 'DDServer Ap' is listed on my Android Tablet, connection was established and the tablet is listed as per screenshot below

our last postings were crossing.

Now I reflashed like advised and did not change anything. Please find screenshots attached.

Sorry for any inconvenience

Ok I reset everything to default again. On default there is only one interface 'LAN' and AP 'DDServerAPP'. This AP is visible on my control device (android tablet) but no connection is possible. Then I established a 2nd interface 'WLAN' with same IP settings as 'LAN' and could connect to my tablet. ...

ok, I checked and tried out. It's strange: I can connect to WLAN OpenWrt and it's showing IP 192.168.1.1 but I can not connect to the device via http://192.168.1.1 (website not available). I tried on my windows PC and on my Android tablet - same result. Connecting my PC via LAN to MR3020 is no problem

ok, I set back SSH port to 22 - but no success: DDServer still not found by DslrDashboard even the processes showing ddserver running.

Anything else I can try?

Hi Zoltan, meanwhile I'm able to connect my android tablet to WLAN 'OpenWrt' via IP 192.168.1.1. In OpenWrt Menue 'Administration - SSH Access' I set the port to 4757 (default was 22) - is there any other way to configure the device port? After starting qDslrDashboard and pressing the WiFi button it...

Hi, very nice: using yours below I was able to get access to TP-Link MR3020 and LuCI interface via LAN and IP 192.168.1.1 again. But the main problem is still existing: My internet router (O2-box) is also using IP 192.168.1.1 and i can not connect to TP-Link MR3020 via WLAN - trying to connect on my...

Hello, after flashing TP-Link MR3020 by using mr3020-v1-15.05.1-factory and mr3020-v1-15.05.1-sysupgrade I was able to connect to the device from PC (runnig with OS Windows 10) via LAN and IP 192.168.1.1 I enabled WiFi OpenWrt and found the device on my android tablet with SSID OpenWrt, but connecti...