dslrdashboard.info

Did some modifications to the code that I think is the problem source.
Here is the debug build: https://drive.google.com/file/d/0BxMZ8X ... sp=sharing

Here is the same but without the debug output: https://drive.google.com/file/d/0BxMZ8X ... sp=sharing

Thanks, will go through the logs.

What DSLR do you use?
What parameters are set in LRT (slowest shutter speed) ?
Do you use the internal interval timer or an external one?
What interval do you use?

After capture the files are different handled in LRTimelapse mode and different when the interval timer is used from the device screen.

In these logs you didn't enter LRTimelapse at all.
You just started the interval timer from the device screen.

Here is a test build for Android: https://drive.google.com/file/d/0BxMZ8X ... sp=sharing

It should work with the D7200 built in wifi and also live view should work. Please test it.
When Nikon releases the documentation I will add the D7200 specific property values

Here is a test version: https://drive.google.com/file/d/0BxMZ8X ... sp=sharing
This should allow using the built in wifi and live view with 7200

You can change the LAN IP address in the OpenWrt web administration. Under Network->Interfaces->LAN Actually on my MR3040 for testing I use something similar by following this guide: http://wiki.openwrt.org/doc/recipes/routedap My wireless interface is set to a static IP 192.168.2.1 And my LAN inter...

DOF calculation are done according this:
http://en.wikipedia.org/wiki/Hyperfocal_distance
http://en.wikipedia.org/wiki/Circle_of_confusion

This also gives same values:
http://www.dofmaster.com/dofjs.html

Maybe I was not so clear in the manual but my English isn't the best.
With Canon only one focus step will works.
If you started moving the focus with the medium and saved a focus point after that you need to use medium all the time, if you use another step qDD will delete the remembered focus points.