dslrdashboard.info

BULB capture will work with an external trigger on D700.
BULB capture can't be started from the application on the D700.

It is not an issue, it is not implemented by Nikon in older models. As I wrote Nikon begin adding the BULB option (command) with the D7100 model and the models after it.

Same with D700, BULB will not work. BULB is only available on newer Nikon models after D7100.

1. BUlb will not work with D7000 as it does not have the required command for that (Nikon added that feature from D7100)

2. with a fast SD card 30sec shutter with 35sec interval should work. My D7100 has no problem with that. (Check if you maybe have NR enabled)

You need to press the 'Network' button (the first button from left on iOS).
The 'Canon wireless' button is only used for Canon DSLR with wireless.

If the camera is not found by single press, long press the 'Network' button and enter 192.168.1.1 as IP and press the 'Connect' button.

OpenGL 2.1 is required.

Can you try and update your Intel graphics driver?

What DSLR do you using? Pair your Android or iOS wireless with the MR3040 wireless. Connect your DSLR with USB to the MR3040 and turn the camera on. Open your web browser on your Android or iOS and navigate to http://192.168.1.1 You should get the OpenWrt web interface. Navigate to Status->System lo...

Can you try and turn off/on the router?
Please update to V0.2.9 on Android.

Not sure I understand the problem. Can you maybe make a screenshoot?
Did you try to enable the 'Full screen' option?
Did you try to change the 'Scale factor' ?