Connecting D810+ TL-MR3040 V.! + Mac osx computer
Connecting D810+ TL-MR3040 V.! + Mac osx computer
Ok, I'm not a computer thicko but clearly something isn't right what I'm doing? Ive upgraded the firmware, connect my tp link mr3040 V.1. to my d810 nikon, I select the TP Link on my wifi, I open DSLR dashboard, and nothing. Dashboard doesn't change shape or into live view or nothing. What the hell? Someone help me out, or should I just save up ridiculous money and just buy the bloody cam ranger?
Re: Connecting D810+ TL-MR3040 V.! + Mac osx computer
Follow these steps:
- turn on the MR3040 and wait till the wireless LED is on
- connect your controlling device wireless to the MR3040 wireless
- connect your camera with USB cable to the MR3040 full size USB port and turn it on
- start qDslrDashboard and press the 'Network' button (second button from left)
If your computer is also connected to your local network with wired networking be check that it is not using the same address space (MR3040 uses 192.168.1.1 by default)
Also check this thread: https://dslrdashboard.info/phpBB3/viewt ... f=5&t=2101
- turn on the MR3040 and wait till the wireless LED is on
- connect your controlling device wireless to the MR3040 wireless
- connect your camera with USB cable to the MR3040 full size USB port and turn it on
- start qDslrDashboard and press the 'Network' button (second button from left)
If your computer is also connected to your local network with wired networking be check that it is not using the same address space (MR3040 uses 192.168.1.1 by default)
Also check this thread: https://dslrdashboard.info/phpBB3/viewt ... f=5&t=2101