Another Error getting dslr list from ip 192.168.1.1

[lvdjc]

Hi, I just joined this forum so first off hello to all. I just got my tp-link mr3040 and followed the V2 instructions to get it to open wrt. It all went ok and the device shows up on 192.168.1.1 on both my ipad mini and 2 seperate Asus zenpad 8's. I can go into my pads browser and open 192.168.1.1 and get to all the settings so that connection must be ok. I got it to connect 1 time through a usb direct connection from my 5d mark iii to the Asus with the qdslr app but anytime I try to plug that same cable into the mr 3040 all I get from the QDSLR app is the following

When my Ipad's or tablets internet is set to my home network the App shows the following

13:05.33 Searching for DDServer
13:05:35 DDServer not found, connecting to IP:192.168.1.1
13:05:35 List connected DSLR at IP: 192.168.1.1

When I set the Ipad's or tablets wifi to DDServer I get

13:09:14 Searching for DDServer
13:09:14 DDServer found at 192.168.1.1
13:09:14 List connected DSLR at IP: 192.168.1.1
13:09:14 Error getting list from IP: 192.168.1.1

I have searched the forum and google and cannot find a way to fix this. I am computer savvy but by no means an expert. Need help. I am assuming that since it connected and worked through the usb connection that the cable (which I bought from Amazon as a OTG cable) should work for the tp-link as well. Going crazy here for the past three hours. Any help greatly apprectated. Dave

[hubaiz]

You need to use the MR3040 full size USB port and don't use an USB OTG adapter.
Did you flash the OpenWrt firmware with ddserver from here: https://dslrdashboard.info/downloads/

Check this post regarding ddserver: viewtopic.php?f=5&t=2101

[lvdjc]

Hi, Stupid me did not try the full size usb cable. I plugged it in and it popped up. Now I cannot get it to auto focus. I have a 5d iii with a 24-70 2.8 with auto focus on the lens turned on but it will not auto focus. I can micro adjust focus point on the bottom of screen so I know it can control camera but can't figure it out. Thanks

[lvdjc]

No need to answer the above question. I realized I had the shutter button set to Metering only because I use Back button focus when not shooting tethered. I changed it back to Focus/metering and the AF on the app worked. Looking forward to exploring the app. Thank you!!!