Can't Connect to DDServer Canon 650D w/Android

qDslrDashbord error reports
Post Reply
acme
Posts: 7
Joined: 28 Jan 2018, 19:10

Can't Connect to DDServer Canon 650D w/Android

Post by acme »

TPLink 3040 v2.5
Samsung Tab A 9.7
Android 7.1.1

Cannot connect via wireless. I have followed this procedure to a "t": viewtopic.php?f=5&t=2101

When I check the log I do not have a device listed. Thoughts anyone?
Top
hubaiz
Site Admin
Posts: 2003
Joined: 27 Jan 2015, 18:58

Re: Can't Connect to DDServer Canon 650D w/Android

Post by hubaiz »

What does say the MR3040 system log?
Top
acme
Posts: 7
Joined: 28 Jan 2018, 19:10

Re: Can't Connect to DDServer Canon 650D w/Android

Post by acme »

This morning it did connect once - then it stopped. For some reason I cannot copy and paste from my device, so I had to reconnect to iMac to get syslog. I think it includes the attempt from this morning before failing. Packet issues? I've only seen the wireless and network light on together once.

Thank you!

Code: Select all

Thu Mar 30 11:01:23 2017 kern.info kernel: [  279.500000] usb 1-1: new high-speed USB device number 35 using ehci-platform
Thu Mar 30 11:01:23 2017 kern.info kernel: [  280.080000] usb 1-1: new high-speed USB device number 36 using ehci-platform
Thu Mar 30 11:01:24 2017 kern.info kernel: [  280.520000] usb 1-1: new high-speed USB device number 37 using ehci-platform
Thu Mar 30 11:01:24 2017 kern.info kernel: [  280.980000] usb 1-1: new high-speed USB device number 38 using ehci-platform
Thu Mar 30 11:01:25 2017 kern.info kernel: [  281.420000] usb 1-1: new high-speed USB device number 39 using ehci-platform
Thu Mar 30 11:01:25 2017 kern.err kernel: [  282.070000] usb 1-1: device not accepting address 39, error -71
Thu Mar 30 11:01:26 2017 kern.info kernel: [  282.410000] usb 1-1: new high-speed USB device number 41 using ehci-platform
Thu Mar 30 11:01:26 2017 kern.info kernel: [  282.850000] usb 1-1: new high-speed USB device number 42 using ehci-platform
Thu Mar 30 11:01:26 2017 user.info syslog: USB Devices in
Thu Mar 30 11:01:26 2017 user.info syslog: Number of possible configurations: 1 Device Class: 0 VendorID: 1193, ProductID: 12859
Thu Mar 30 11:01:26 2017 user.info syslog: Number of alternate settings:
Thu Mar 30 11:01:26 2017 user.info syslog: Interface class: 6 Interface number: 0 Number of endpoints: 3
Thu Mar 30 11:01:26 2017 user.info syslog: Found USB imaging device, get vendor and product
Thu Mar 30 11:01:26 2017 user.info syslog: Device Manufacturer: Canon Inc.
Thu Mar 30 11:01:26 2017 user.info syslog: Device Product: Canon Digital Camera
Thu Mar 30 11:01:26 2017 user.info syslog: Number of possible configurations: 1 Device Class: 9 VendorID: 7531, ProductID: 2
Thu Mar 30 11:01:26 2017 user.info syslog: Number of alternate settings:
Thu Mar 30 11:01:26 2017 user.info syslog: Interface class: 9 Interface number: 0 Number of endpoints: 1
Thu Mar 30 11:01:26 2017 user.info syslog: Imaging USB devices found: 1
Thu Mar 30 11:01:26 2017 user.err syslog: Error reading total packet size: 0
Thu Mar 30 11:01:26 2017 user.err syslog: Stoping client
Thu Mar 30 11:01:26 2017 user.info syslog: Incoming client connection
Thu Mar 30 11:01:26 2017 user.info syslog: Awaiting client connection
Thu Mar 30 11:01:26 2017 user.info syslog: USB Devices in
Thu Mar 30 11:01:26 2017 user.info syslog: Checking device with vendorId: 04a9  and productId: 323b
Thu Mar 30 11:01:26 2017 user.info syslog: Trying to open device
Thu Mar 30 11:01:26 2017 user.info syslog: Number of possible configurations: 1 Device Class: 0 VendorID: 1193, ProductID: 12859
Thu Mar 30 11:01:26 2017 user.info syslog: Number of alternate settings:
Thu Mar 30 11:01:26 2017 user.info syslog: Interface class: 6 Interface number: 0 Number of endpoints: 3
Thu Mar 30 11:01:26 2017 user.info syslog: Found USB imaging device, get vendor and product
Thu Mar 30 11:01:26 2017 user.info syslog: Device  open success
Thu Mar 30 11:01:26 2017 user.info syslog: USB device opened
Thu Mar 30 11:01:26 2017 user.info syslog: Read endpoint adress: 129
Thu Mar 30 11:01:26 2017 user.info syslog: Write endpoint adress: 2
Thu Mar 30 11:01:26 2017 user.info syslog: Interrupt endpoint address: 131
Thu Mar 30 11:01:26 2017 user.info syslog: USB interface claimed
Thu Mar 30 11:01:26 2017 user.info syslog: vendor: 1193 product: 12859
Thu Mar 30 11:01:26 2017 user.info syslog: vendor: 43268 product: 15154
Thu Mar 30 11:01:26 2017 kern.info kernel: [  283.160000] usb 1-1: USB disconnect, device number 42
Thu Mar 30 11:01:26 2017 user.err syslog: No USB data after 5 retries
Thu Mar 30 11:01:26 2017 user.err syslog: error reading USB PTP packets
Thu Mar 30 11:01:26 2017 user.err syslog: Stoping client
Thu Mar 30 11:01:27 2017 kern.info kernel: [  283.450000] usb 1-1: new high-speed USB device number 43 using ehci-platform
Thu Mar 30 11:01:27 2017 kern.info kernel: [  284.060000] usb 1-1: new high-speed USB device number 44 using ehci-platform
Thu Mar 30 11:01:28 2017 kern.info kernel: [  284.580000] usb 1-1: new high-speed USB device number 45 using ehci-platform
Thu Mar 30 11:01:28 2017 kern.info kernel: [  285.050000] usb 1-1: new high-speed USB device number 46 using ehci-platform
Thu Mar 30 11:01:28 2017 user.info syslog: Closing USB device
Thu Mar 30 11:01:28 2017 user.info syslog: Closing USB device
Thu Mar 30 11:01:28 2017 user.err syslog: Unable to release USB interface
Thu Mar 30 11:01:29 2017 kern.info kernel: [  285.560000] usb 1-1: new high-speed USB device number 47 using ehci-platform
Thu Mar 30 11:01:29 2017 kern.info kernel: [  286.080000] usb 1-1: new high-speed USB device number 48 using ehci-platform
Thu Mar 30 11:01:30 2017 kern.info kernel: [  286.690000] usb 1-1: new high-speed USB device number 49 using ehci-platform
Thu Mar 30 11:01:31 2017 kern.info kernel: [  287.440000] usb 1-1: new high-speed USB device number 50 using ehci-platform
Thu Mar 30 11:01:31 2017 kern.info kernel: [  287.880000] usb 1-1: new high-speed USB device number 51 using ehci-platform
Thu Mar 30 11:01:32 2017 kern.err kernel: [  288.600000] usb 1-1: device not accepting address 51, error -71
Thu Mar 30 11:01:32 2017 kern.info kernel: [  288.940000] usb 1-1: new high-speed USB device number 53 using ehci-platform
Thu Mar 30 11:01:33 2017 kern.info kernel: [  289.720000] usb 1-1: new high-speed USB device number 54 using ehci-platform
Thu Mar 30 11:01:34 2017 kern.info kernel: [  290.300000] usb 1-1: new high-speed USB device number 55 using ehci-platform
Thu Mar 30 11:01:34 2017 kern.info kernel: [  290.960000] usb 1-1: new high-speed USB device number 56 using ehci-platform
Thu Mar 30 11:01:35 2017 kern.info kernel: [  291.400000] usb 1-1: new high-speed USB device number 57 using ehci-platform
Thu Mar 30 11:01:35 2017 kern.info kernel: [  291.990000] usb 1-1: new high-speed USB device number 58 using ehci-platform
Thu Mar 30 11:01:36 2017 kern.info kernel: [  292.580000] usb 1-1: new high-speed USB device number 59 using ehci-platform
Thu Mar 30 11:01:36 2017 kern.info kernel: [  293.150000] usb 1-1: new high-speed USB device number 60 using ehci-platform
Thu Mar 30 11:01:37 2017 kern.info kernel: [  293.680000] usb 1-1: new high-speed USB device number 61 using ehci-platform
Thu Mar 30 11:01:38 2017 kern.info kernel: [  294.660000] usb 1-1: new high-speed USB device number 62 using ehci-platform
Thu Mar 30 11:01:39 2017 kern.info kernel: [  295.230000] usb 1-1: new high-speed USB device number 63 using ehci-platform
Thu Mar 30 11:01:39 2017 kern.info kernel: [  295.700000] usb 1-1: new high-speed USB device number 64 using ehci-platform
Thu Mar 30 11:01:40 2017 kern.info kernel: [  296.230000] usb 1-1: new high-speed USB device number 65 using ehci-platform
Thu Mar 30 11:01:40 2017 kern.info kernel: [  296.670000] usb 1-1: new high-speed USB device number 66 using ehci-platform
Thu Mar 30 11:01:41 2017 kern.err kernel: [  297.270000] usb 1-1: device not accepting address 66, error -71
Thu Mar 30 11:01:41 2017 kern.info kernel: [  297.610000] usb 1-1: new high-speed USB device number 68 using ehci-platform
Thu Mar 30 11:01:42 2017 kern.info kernel: [  298.250000] usb 1-1: new high-speed USB device number 69 using ehci-platform
Thu Mar 30 11:01:42 2017 kern.info kernel: [  298.780000] usb 1-1: new high-speed USB device number 70 using ehci-platform
Thu Mar 30 11:01:43 2017 kern.info kernel: [  299.250000] usb 1-1: new high-speed USB device number 71 using ehci-platform
Thu Mar 30 11:01:43 2017 kern.info kernel: [  299.780000] usb 1-1: new high-speed USB device number 72 using ehci-platform
Thu Mar 30 11:01:44 2017 kern.info kernel: [  300.230000] usb 1-1: new high-speed USB device number 73 using ehci-platform
Thu Mar 30 11:01:44 2017 kern.info kernel: [  300.700000] usb 1-1: new high-speed USB device number 74 using ehci-platform
Thu Mar 30 11:01:45 2017 kern.info kernel: [  301.250000] usb 1-1: new high-speed USB device number 75 using ehci-platform
Thu Mar 30 11:01:45 2017 kern.info kernel: [  301.690000] usb 1-1: new high-speed USB device number 76 using ehci-platform
Thu Mar 30 11:01:46 2017 kern.err kernel: [  302.300000] usb 1-1: device not accepting address 76, error -71
Thu Mar 30 11:01:46 2017 kern.info kernel: [  302.640000] usb 1-1: new high-speed USB device number 78 using ehci-platform
Thu Mar 30 11:01:46 2017 kern.info kernel: [  303.180000] usb 1-1: new high-speed USB device number 79 using ehci-platform
Thu Mar 30 11:01:47 2017 kern.info kernel: [  303.850000] usb 1-1: new high-speed USB device number 80 using ehci-platform
Thu Mar 30 11:01:48 2017 kern.info kernel: [  304.520000] usb 1-1: new high-speed USB device number 81 using ehci-platform
Thu Mar 30 11:01:49 2017 kern.info kernel: [  305.970000] usb 1-1: new high-speed USB device number 82 using ehci-platform
Thu Mar 30 11:01:50 2017 kern.info kernel: [  306.570000] usb 1-1: new high-speed USB device number 83 using ehci-platform
Thu Mar 30 11:01:50 2017 kern.info kernel: [  307.010000] usb 1-1: new high-speed USB device number 84 using ehci-platform
Thu Mar 30 11:01:51 2017 kern.info kernel: [  307.520000] usb 1-1: new high-speed USB device number 85 using ehci-platform
Thu Mar 30 11:01:51 2017 kern.info kernel: [  308.050000] usb 1-1: new high-speed USB device number 86 using ehci-platform
Thu Mar 30 11:01:52 2017 kern.info kernel: [  308.570000] usb 1-1: new high-speed USB device number 87 using ehci-platform
Thu Mar 30 11:01:52 2017 kern.info kernel: [  309.020000] usb 1-1: new high-speed USB device number 88 using ehci-platform
Thu Mar 30 11:01:53 2017 kern.info kernel: [  309.460000] usb 1-1: new high-speed USB device number 89 using ehci-platform
Thu Mar 30 11:01:53 2017 kern.info kernel: [  309.900000] usb 1-1: new high-speed USB device number 90 using ehci-platform
Thu Mar 30 11:01:54 2017 kern.info kernel: [  310.340000] usb 1-1: new high-speed USB device number 91 using ehci-platform
Thu Mar 30 11:01:54 2017 kern.info kernel: [  310.780000] usb 1-1: new high-speed USB device number 92 using ehci-platform
Thu Mar 30 11:01:55 2017 kern.err kernel: [  311.450000] usb 1-1: device not accepting address 92, error -71
Thu Mar 30 11:01:55 2017 kern.info kernel: [  311.790000] usb 1-1: new high-speed USB device number 94 using ehci-platform
Thu Mar 30 11:01:56 2017 kern.info kernel: [  312.230000] usb 1-1: new high-speed USB device number 95 using ehci-platform
Thu Mar 30 11:01:56 2017 kern.info kernel: [  312.960000] usb 1-1: new high-speed USB device number 96 using ehci-platform
Thu Mar 30 11:01:57 2017 kern.info kernel: [  313.530000] usb 1-1: new high-speed USB device number 97 using ehci-platform
Thu Mar 30 11:01:57 2017 kern.info kernel: [  313.980000] usb 1-1: new high-speed USB device number 98 using ehci-platform
Thu Mar 30 11:01:58 2017 kern.info kernel: [  314.460000] usb 1-1: new high-speed USB device number 99 using ehci-platform
Thu Mar 30 11:01:58 2017 kern.info kernel: [  314.900000] usb 1-1: new high-speed USB device number 100 using ehci-platform
Thu Mar 30 11:01:59 2017 kern.err kernel: [  315.840000] usb 1-1: device not accepting address 100, error -71
Thu Mar 30 11:01:59 2017 kern.info kernel: [  316.180000] usb 1-1: new high-speed USB device number 102 using ehci-platform
Thu Mar 30 11:02:00 2017 kern.info kernel: [  316.620000] usb 1-1: new high-speed USB device number 103 using ehci-platform
Thu Mar 30 11:02:00 2017 kern.info kernel: [  317.130000] usb 1-1: new high-speed USB device number 104 using ehci-platform
Thu Mar 30 11:02:01 2017 kern.info kernel: [  317.650000] usb 1-1: new high-speed USB device number 105 using ehci-platform
Thu Mar 30 11:02:01 2017 kern.info kernel: [  318.100000] usb 1-1: new high-speed USB device number 106 using ehci-platform
Thu Mar 30 11:02:02 2017 kern.info kernel: [  318.610000] usb 1-1: new high-speed USB device number 107 using ehci-platform
Thu Mar 30 11:02:02 2017 kern.info kernel: [  319.060000] usb 1-1: new high-speed USB device number 108 using ehci-platform
Thu Mar 30 11:02:04 2017 kern.info kernel: [  320.470000] usb 1-1: new high-speed USB device number 109 using ehci-platform
Thu Mar 30 11:02:04 2017 kern.info kernel: [  320.930000] usb 1-1: new high-speed USB device number 110 using ehci-platform
Thu Mar 30 11:02:05 2017 kern.info kernel: [  322.130000] usb 1-1: new high-speed USB device number 111 using ehci-platform
Thu Mar 30 11:02:11 2017 kern.err kernel: [  327.250000] usb 1-1: device descriptor read/64, error -145
Thu Mar 30 11:02:14 2017 kern.info kernel: [  331.120000] usb 1-1: new high-speed USB device number 112 using ehci-platform
Thu Mar 30 11:02:19 2017 kern.info kernel: [  335.390000] usb 1-1: new high-speed USB device number 113 using ehci-platform
Thu Mar 30 11:02:24 2017 kern.err kernel: [  340.510000] usb 1-1: device descriptor read/64, error -145
Thu Mar 30 11:02:31 2017 kern.info kernel: [  348.220000] usb 1-1: new high-speed USB device number 114 using ehci-platform
Thu Mar 30 11:02:32 2017 kern.info kernel: [  348.780000] usb 1-1: new high-speed USB device number 115 using ehci-platform
Thu Mar 30 11:02:33 2017 kern.info kernel: [  349.280000] usb 1-1: new high-speed USB device number 116 using ehci-platform
Thu Mar 30 11:02:33 2017 kern.info kernel: [  349.960000] usb 1-1: new high-speed USB device number 117 using ehci-platform
Thu Mar 30 11:02:34 2017 kern.info kernel: [  350.490000] usb 1-1: new high-speed USB device number 118 using ehci-platform
Thu Mar 30 11:02:34 2017 kern.info kernel: [  351.000000] usb 1-1: new high-speed USB device number 119 using ehci-platform
Thu Mar 30 11:02:36 2017 kern.info kernel: [  352.250000] usb 1-1: new high-speed USB device number 120 using ehci-platform
Thu Mar 30 11:02:36 2017 kern.info kernel: [  352.940000] usb 1-1: new high-speed USB device number 121 using ehci-platform
Thu Mar 30 11:02:37 2017 kern.info kernel: [  353.380000] usb 1-1: new high-speed USB device number 122 using ehci-platform
Thu Mar 30 11:02:37 2017 kern.info kernel: [  353.920000] usb 1-1: new high-speed USB device number 123 using ehci-platform
Thu Mar 30 11:02:38 2017 kern.info kernel: [  354.970000] usb 1-1: new high-speed USB device number 124 using ehci-platform
Thu Mar 30 11:02:39 2017 kern.info kernel: [  355.420000] usb 1-1: new high-speed USB device number 125 using ehci-platform
Thu Mar 30 11:02:40 2017 kern.info kernel: [  356.350000] usb 1-1: new high-speed USB device number 126 using ehci-platform
Thu Mar 30 11:02:41 2017 kern.info kernel: [  357.730000] usb 1-1: new high-speed USB device number 127 using ehci-platform
Thu Mar 30 11:02:42 2017 kern.info kernel: [  358.900000] usb 1-1: new high-speed USB device number 2 using ehci-platform
Thu Mar 30 11:02:44 2017 kern.info kernel: [  360.760000] usb 1-1: new high-speed USB device number 3 using ehci-platform
Thu Mar 30 11:02:45 2017 kern.info kernel: [  361.740000] usb 1-1: new high-speed USB device number 4 using ehci-platform
Thu Mar 30 11:02:50 2017 kern.err kernel: [  366.860000] usb 1-1: device descriptor read/64, error -145
Thu Mar 30 11:02:56 2017 kern.info kernel: [  373.140000] usb 1-1: new high-speed USB device number 5 using ehci-platform
Thu Mar 30 11:02:57 2017 kern.info kernel: [  374.200000] usb 1-1: new high-speed USB device number 6 using ehci-platform
Thu Mar 30 11:02:59 2017 daemon.info hostapd: wlan0: STA 7c:c3:a1:71:ab:93 IEEE 802.11: authenticated
Thu Mar 30 11:02:59 2017 daemon.info hostapd: wlan0: STA 7c:c3:a1:71:ab:93 IEEE 802.11: associated (aid 2)
Thu Mar 30 11:03:02 2017 daemon.info dnsmasq-dhcp[1006]: DHCPDISCOVER(br-lan) 7c:c3:a1:71:ab:93 
Thu Mar 30 11:03:02 2017 daemon.info dnsmasq-dhcp[1006]: DHCPOFFER(br-lan) 192.168.1.125 7c:c3:a1:71:ab:93 
Thu Mar 30 11:03:02 2017 daemon.info dnsmasq-dhcp[1006]: DHCPDISCOVER(br-lan) 7c:c3:a1:71:ab:93 
Thu Mar 30 11:03:02 2017 daemon.info dnsmasq-dhcp[1006]: DHCPOFFER(br-lan) 192.168.1.125 7c:c3:a1:71:ab:93 
Thu Mar 30 11:03:03 2017 daemon.info dnsmasq-dhcp[1006]: DHCPREQUEST(br-lan) 192.168.1.125 7c:c3:a1:71:ab:93 
Thu Mar 30 11:03:03 2017 daemon.info dnsmasq-dhcp[1006]: DHCPACK(br-lan) 192.168.1.125 7c:c3:a1:71:ab:93 Faulkner
Thu Mar 30 11:03:08 2017 kern.err kernel: [  384.740000] usb 1-1: device not accepting address 6, error -145
Thu Mar 30 11:03:08 2017 kern.info kernel: [  384.860000] usb 1-1: new high-speed USB device number 7 using ehci-platform
Thu Mar 30 11:03:13 2017 kern.err kernel: [  389.980000] usb 1-1: device descriptor read/64, error -145
Thu Mar 30 11:03:28 2017 kern.err kernel: [  405.210000] usb 1-1: device descriptor read/64, error -145
Thu Mar 30 11:03:29 2017 kern.info kernel: [  405.440000] usb 1-1: new high-speed USB device number 8 using ehci-platform
Thu Mar 30 11:03:36 2017 kern.err kernel: [  412.810000] usb 1-1: device not accepting address 8, error -71
Thu Mar 30 11:03:36 2017 kern.info kernel: [  413.150000] usb 1-1: new high-speed USB device number 10 using ehci-platform
Thu Mar 30 11:03:42 2017 kern.err kernel: [  418.270000] usb 1-1: device descriptor read/64, error -145
Thu Mar 30 11:03:52 2017 kern.err kernel: [  428.920000] usb 1-1: device not accepting address 10, error -145
Thu Mar 30 11:03:52 2017 kern.info kernel: [  429.040000] usb 1-1: new high-speed USB device number 11 using ehci-platform
Thu Mar 30 11:03:58 2017 kern.info kernel: [  434.380000] usb 1-1: new high-speed USB device number 12 using ehci-platform
Thu Mar 30 11:04:03 2017 kern.err kernel: [  439.500000] usb 1-1: device descriptor read/64, error -145
Thu Mar 30 11:06:18 2017 daemon.info hostapd: wlan0: STA 7c:c3:a1:71:ab:93 IEEE 802.11: disassociated
Thu Mar 30 11:06:19 2017 daemon.info hostapd: wlan0: STA 7c:c3:a1:71:ab:93 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Thu Mar 30 11:06:37 2017 kern.info kernel: [  594.170000] eth0: link up (100Mbps/Full duplex)
Thu Mar 30 11:06:37 2017 kern.info kernel: [  594.170000] br-lan: port 1(eth0) entered forwarding state
Thu Mar 30 11:06:37 2017 kern.info kernel: [  594.180000] br-lan: port 1(eth0) entered forwarding state
Thu Mar 30 11:06:37 2017 daemon.notice netifd: Network device 'eth0' link is up
Thu Mar 30 11:06:39 2017 daemon.info dnsmasq-dhcp[1006]: DHCPREQUEST(br-lan) 192.168.0.101 1c:1b:0d:6b:d7:74 
Thu Mar 30 11:06:39 2017 daemon.info dnsmasq-dhcp[1006]: DHCPNAK(br-lan) 192.168.0.101 1c:1b:0d:6b:d7:74 wrong address
Thu Mar 30 11:06:39 2017 kern.info kernel: [  596.180000] br-lan: port 1(eth0) entered forwarding state
Thu Mar 30 11:06:41 2017 daemon.info dnsmasq-dhcp[1006]: DHCPREQUEST(br-lan) 192.168.1.240 1c:1b:0d:6b:d7:74 
Thu Mar 30 11:06:41 2017 daemon.info dnsmasq-dhcp[1006]: DHCPACK(br-lan) 192.168.1.240 1c:1b:0d:6b:d7:74 iMac
Top
hubaiz
Site Admin
Posts: 2003
Joined: 27 Jan 2015, 18:58

Re: Can't Connect to DDServer Canon 650D w/Android

Post by hubaiz »

Do you use the USB cable that you get with your DSLR?
Eventually try changing the USB cable.
Is the USB cable connected to the MR3040 full size USB port?
Top
acme
Posts: 7
Joined: 28 Jan 2018, 19:10

Re: Can't Connect to DDServer Canon 650D w/Android

Post by acme »

• Yes I use the USB cable that came with the camera.

• The cable works fine via USB option on qdslrdasboard and other apps.

• I even purchased a brand new 1' cable, and finally... yes I am using the Full Size "A" USB port on the router.

• Still No Joy :(


Thanks!
Top
hubaiz
Site Admin
Posts: 2003
Joined: 27 Jan 2015, 18:58

Re: Can't Connect to DDServer Canon 650D w/Android

Post by hubaiz »

Try and reflash the router using the instructions here: https://dslrdashboard.info/tp-link-mr30 ... e-upgrade/
Top
acme
Posts: 7
Joined: 28 Jan 2018, 19:10

Re: Can't Connect to DDServer Canon 650D w/Android

Post by acme »

Okay I tried your solution.

Here is the syslog from the reflash:

Code: Select all

Thu Mar 30 10:56:59 2017 kern.notice kernel: [    0.000000] Linux version 3.18.45 (hubaiz@vmmint) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49389) ) #1 Thu Mar 30 12:53:36 CEST 2017
Thu Mar 30 10:56:59 2017 kern.debug kernel: [    0.000000] MyLoader: sysp=0e150df8, boardp=46eb1d6d, parts=30c40fa1
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.000000] bootconsole [early0] enabled
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.000000] SoC: Atheros AR9330 rev 1
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.000000] Determined physical RAM map:
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.000000]  memory: 02000000 @ 00000000 (usable)
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Thu Mar 30 10:56:59 2017 kern.warn kernel: [    0.000000] Zone ranges:
Thu Mar 30 10:56:59 2017 kern.warn kernel: [    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
Thu Mar 30 10:56:59 2017 kern.warn kernel: [    0.000000] Movable zone start for each node
Thu Mar 30 10:56:59 2017 kern.warn kernel: [    0.000000] Early memory node ranges
Thu Mar 30 10:56:59 2017 kern.warn kernel: [    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x00000000-0x01ffffff]
Thu Mar 30 10:56:59 2017 kern.debug kernel: [    0.000000] On node 0 totalpages: 8192
Thu Mar 30 10:56:59 2017 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 803660f0, node_mem_map 81000000
Thu Mar 30 10:56:59 2017 kern.debug kernel: [    0.000000]   Normal zone: 64 pages used for memmap
Thu Mar 30 10:56:59 2017 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Thu Mar 30 10:56:59 2017 kern.debug kernel: [    0.000000]   Normal zone: 8192 pages, LIFO batch:0
Thu Mar 30 10:56:59 2017 kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Thu Mar 30 10:56:59 2017 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Thu Mar 30 10:56:59 2017 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Thu Mar 30 10:56:59 2017 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 
Thu Mar 30 10:56:59 2017 kern.warn kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Thu Mar 30 10:56:59 2017 kern.notice kernel: [    0.000000] Kernel command line:  board=TL-MR3040-v2  console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.000000] Writing ErrCtl register=00000000
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.000000] Readback ErrCtl register=00000000
Thu Mar 30 10:56:59 2017 kern.warn kernel: [    0.000000] Memory: 28392K/32768K available (2523K kernel code, 143K rwdata, 540K rodata, 240K init, 188K bss, 4376K reserved)
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.000000] NR_IRQS:51
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.080000] pid_max: default: 32768 minimum: 301
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.100000] NET: Registered protocol family 16
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.100000] MIPS: machine is TP-LINK TL-MR3040 v2
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.370000] Switched to clocksource MIPS
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.370000] NET: Registered protocol family 2
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.380000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.380000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.380000] TCP: Hash tables configured (established 1024 bind 1024)
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.390000] TCP: reno registered
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.390000] UDP hash table entries: 256 (order: 0, 4096 bytes)
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.400000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.410000] NET: Registered protocol family 1
Thu Mar 30 10:56:59 2017 kern.debug kernel: [    0.410000] PCI: CLS 0 bytes, default 32
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.410000] futex hash table entries: 256 (order: -1, 3072 bytes)
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.430000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.430000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.440000] msgmni has been set to 55
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.460000] io scheduler noop registered
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.460000] io scheduler deadline registered (default)
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.460000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.470000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a AR933X UART
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.480000] console [ttyATH0] enabled
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.490000] bootconsole [early0] disabled
Thu Mar 30 10:56:59 2017 kern.warn kernel: [    0.500000] m25p80 spi0.0: found w25q32, expected m25p80
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.500000] m25p80 spi0.0: w25q32 (4096 Kbytes)
Thu Mar 30 10:56:59 2017 kern.notice kernel: [    0.510000] 5 tp-link partitions found on MTD device spi0.0
Thu Mar 30 10:56:59 2017 kern.notice kernel: [    0.510000] Creating 5 MTD partitions on "spi0.0":
Thu Mar 30 10:56:59 2017 kern.notice kernel: [    0.520000] 0x000000000000-0x000000020000 : "u-boot"
Thu Mar 30 10:56:59 2017 kern.notice kernel: [    0.520000] 0x000000020000-0x00000013a9a8 : "kernel"
Thu Mar 30 10:56:59 2017 kern.notice kernel: [    0.530000] 0x00000013a9a8-0x0000003f0000 : "rootfs"
Thu Mar 30 10:56:59 2017 kern.notice kernel: [    0.530000] mtd: device 2 (rootfs) set to be root filesystem
Thu Mar 30 10:56:59 2017 kern.notice kernel: [    0.540000] 1 squashfs-split partitions found on MTD device rootfs
Thu Mar 30 10:56:59 2017 kern.notice kernel: [    0.540000] 0x000000380000-0x0000003f0000 : "rootfs_data"
Thu Mar 30 10:56:59 2017 kern.notice kernel: [    0.550000] 0x0000003f0000-0x000000400000 : "art"
Thu Mar 30 10:56:59 2017 kern.notice kernel: [    0.550000] 0x000000020000-0x0000003f0000 : "firmware"
Thu Mar 30 10:56:59 2017 kern.info kernel: [    0.580000] libphy: ag71xx_mdio: probed
Thu Mar 30 10:56:59 2017 kern.info kernel: [    1.170000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
Thu Mar 30 10:56:59 2017 kern.info kernel: [    1.180000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
Thu Mar 30 10:56:59 2017 kern.info kernel: [    1.180000] TCP: cubic registered
Thu Mar 30 10:56:59 2017 kern.info kernel: [    1.180000] NET: Registered protocol family 17
Thu Mar 30 10:56:59 2017 kern.info kernel: [    1.190000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Thu Mar 30 10:56:59 2017 kern.info kernel: [    1.200000] 8021q: 802.1Q VLAN Support v1.8
Thu Mar 30 10:56:59 2017 kern.info kernel: [    1.210000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Thu Mar 30 10:56:59 2017 kern.info kernel: [    1.220000] Freeing unused kernel memory: 240K (80384000 - 803c0000)
Thu Mar 30 10:56:59 2017 user.info kernel: [    2.540000] init: Console is alive
Thu Mar 30 10:56:59 2017 user.info kernel: [    2.540000] init: - watchdog -
Thu Mar 30 10:56:59 2017 kern.info kernel: [    3.950000] usbcore: registered new interface driver usbfs
Thu Mar 30 10:56:59 2017 kern.info kernel: [    3.950000] usbcore: registered new interface driver hub
Thu Mar 30 10:56:59 2017 kern.info kernel: [    3.960000] usbcore: registered new device driver usb
Thu Mar 30 10:56:59 2017 kern.info kernel: [    3.970000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Thu Mar 30 10:56:59 2017 kern.info kernel: [    3.970000] ehci-platform: EHCI generic platform driver
Thu Mar 30 10:56:59 2017 kern.info kernel: [    3.980000] ehci-platform ehci-platform: EHCI Host Controller
Thu Mar 30 10:56:59 2017 kern.info kernel: [    3.980000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Thu Mar 30 10:56:59 2017 kern.info kernel: [    3.990000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Thu Mar 30 10:56:59 2017 kern.info kernel: [    4.020000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Thu Mar 30 10:56:59 2017 kern.info kernel: [    4.020000] hub 1-0:1.0: USB hub found
Thu Mar 30 10:56:59 2017 kern.info kernel: [    4.020000] hub 1-0:1.0: 1 port detected
Thu Mar 30 10:56:59 2017 user.info kernel: [    4.620000] init: - preinit -
Thu Mar 30 10:56:59 2017 kern.notice kernel: [    5.450000] random: mktemp urandom read with 8 bits of entropy available
Thu Mar 30 10:56:59 2017 kern.warn kernel: [    7.610000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x10000
Thu Mar 30 10:56:59 2017 kern.warn kernel: [    7.620000] jffs2_build_filesystem(): unlocking the mtd device... done.
Thu Mar 30 10:56:59 2017 kern.warn kernel: [    7.620000] jffs2_build_filesystem(): erasing all blocks after the end marker... 
Thu Mar 30 10:56:59 2017 kern.info kernel: [    8.300000] eth0: link up (100Mbps/Full duplex)
Thu Mar 30 10:56:59 2017 kern.warn kernel: [    9.030000] done.
Thu Mar 30 10:56:59 2017 kern.notice kernel: [    9.040000] jffs2: notice: (330) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Thu Mar 30 10:56:59 2017 user.info kernel: [    9.050000] mount_root: overlay filesystem has not been fully initialized yet
Thu Mar 30 10:56:59 2017 user.info kernel: [    9.060000] mount_root: switching to jffs2 overlay
Thu Mar 30 10:56:59 2017 kern.info kernel: [    9.530000] eth0: link down
Thu Mar 30 10:56:59 2017 user.info kernel: [    9.540000] procd: - early -
Thu Mar 30 10:56:59 2017 user.info kernel: [    9.540000] procd: - watchdog -
Thu Mar 30 10:56:59 2017 user.info kernel: [   10.240000] procd: - ubus -
Thu Mar 30 10:56:59 2017 user.info kernel: [   11.250000] procd: - init -
Thu Mar 30 10:56:59 2017 kern.info kernel: [   12.320000] NET: Registered protocol family 10
Thu Mar 30 10:56:59 2017 kern.info kernel: [   12.330000] ip6_tables: (C) 2000-2006 Netfilter Core Team
Thu Mar 30 10:56:59 2017 kern.info kernel: [   12.350000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
Thu Mar 30 10:56:59 2017 kern.info kernel: [   12.360000] Backport generated by backports.git backports-20151218-0-g2f58d9d
Thu Mar 30 10:56:59 2017 kern.info kernel: [   12.370000] ip_tables: (C) 2000-2006 Netfilter Core Team
Thu Mar 30 10:56:59 2017 kern.info kernel: [   12.390000] nf_conntrack version 0.5.0 (447 buckets, 1788 max)
Thu Mar 30 10:56:59 2017 kern.info kernel: [   12.440000] xt_time: kernel timezone is -0000
Thu Mar 30 10:56:59 2017 kern.info kernel: [   12.560000] PPP generic driver version 2.4.2
Thu Mar 30 10:56:59 2017 kern.info kernel: [   12.560000] NET: Registered protocol family 24
Thu Mar 30 10:56:59 2017 kern.debug kernel: [   12.630000] ath: EEPROM regdomain: 0x0
Thu Mar 30 10:56:59 2017 kern.debug kernel: [   12.630000] ath: EEPROM indicates default country code should be used
Thu Mar 30 10:56:59 2017 kern.debug kernel: [   12.630000] ath: doing EEPROM country->regdmn map search
Thu Mar 30 10:56:59 2017 kern.debug kernel: [   12.630000] ath: country maps to regdmn code: 0x3a
Thu Mar 30 10:56:59 2017 kern.debug kernel: [   12.630000] ath: Country alpha2 being used: US
Thu Mar 30 10:56:59 2017 kern.debug kernel: [   12.630000] ath: Regpair used: 0x3a
Thu Mar 30 10:56:59 2017 kern.debug kernel: [   12.640000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Thu Mar 30 10:56:59 2017 kern.info kernel: [   12.640000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
Thu Mar 30 10:57:04 2017 kern.info kernel: [   21.590000] device eth0 entered promiscuous mode
Thu Mar 30 10:57:04 2017 kern.info kernel: [   21.590000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Thu Mar 30 10:57:04 2017 daemon.notice netifd: Interface 'lan' is enabled
Thu Mar 30 10:57:04 2017 daemon.notice netifd: Interface 'lan' is setting up now
Thu Mar 30 10:57:04 2017 daemon.notice netifd: Interface 'lan' is now up
Thu Mar 30 10:57:04 2017 daemon.notice netifd: Interface 'loopback' is enabled
Thu Mar 30 10:57:04 2017 daemon.notice netifd: Interface 'loopback' is setting up now
Thu Mar 30 10:57:04 2017 daemon.notice netifd: Interface 'loopback' is now up
Thu Mar 30 10:57:04 2017 daemon.notice netifd: Network device 'lo' link is up
Thu Mar 30 10:57:04 2017 daemon.notice netifd: Interface 'loopback' has link connectivity 
Thu Mar 30 10:57:05 2017 authpriv.info dropbear[896]: Not backgrounding
Thu Mar 30 10:57:05 2017 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Thu Mar 30 10:57:07 2017 kern.info kernel: [   24.680000] eth0: link up (100Mbps/Full duplex)
Thu Mar 30 10:57:07 2017 kern.info kernel: [   24.710000] br-lan: port 1(eth0) entered forwarding state
Thu Mar 30 10:57:07 2017 kern.info kernel: [   24.710000] br-lan: port 1(eth0) entered forwarding state
Thu Mar 30 10:57:07 2017 kern.info kernel: [   24.720000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Thu Mar 30 10:57:07 2017 daemon.notice netifd: Network device 'eth0' link is up
Thu Mar 30 10:57:07 2017 daemon.notice netifd: Bridge 'br-lan' link is up
Thu Mar 30 10:57:07 2017 daemon.notice netifd: Interface 'lan' has link connectivity 
Thu Mar 30 10:57:07 2017 daemon.notice netifd: radio0 (861): Configuration file: /var/run/hostapd-phy0.conf
Thu Mar 30 10:57:07 2017 kern.info kernel: [   24.850000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Thu Mar 30 10:57:07 2017 kern.info kernel: [   24.870000] device wlan0 entered promiscuous mode
Thu Mar 30 10:57:07 2017 kern.info kernel: [   24.870000] br-lan: port 2(wlan0) entered forwarding state
Thu Mar 30 10:57:07 2017 kern.info kernel: [   24.880000] br-lan: port 2(wlan0) entered forwarding state
Thu Mar 30 10:57:07 2017 daemon.notice netifd: radio0 (861): wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Thu Mar 30 10:57:07 2017 daemon.notice netifd: radio0 (861): Using interface wlan0 with hwaddr 18:d6:c7:8e:a0:ac and ssid "DDServerAP"
Thu Mar 30 10:57:07 2017 kern.info kernel: [   24.910000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Thu Mar 30 10:57:07 2017 daemon.notice netifd: radio0 (861): wlan0: interface state COUNTRY_UPDATE->ENABLED
Thu Mar 30 10:57:07 2017 daemon.notice netifd: radio0 (861): wlan0: AP-ENABLED 
Thu Mar 30 10:57:08 2017 daemon.notice netifd: Network device 'wlan0' link is up
Thu Mar 30 10:57:09 2017 user.emerg syslog: setting up led USB
Thu Mar 30 10:57:09 2017 user.emerg syslog: setting up led WLAN
Thu Mar 30 10:57:09 2017 user.emerg syslog: setting up led LAN
Thu Mar 30 10:57:09 2017 kern.info kernel: [   26.710000] br-lan: port 1(eth0) entered forwarding state
Thu Mar 30 10:57:09 2017 kern.info kernel: [   26.880000] br-lan: port 2(wlan0) entered forwarding state
Thu Mar 30 10:57:10 2017 user.emerg syslog: start
Thu Mar 30 10:57:10 2017 user.emerg syslog: Saving PID 1082  to  /var/run/ddserver.pid
Thu Mar 30 10:57:10 2017 user.emerg syslog: Ok
Thu Mar 30 10:57:10 2017 daemon.info procd: - init complete -
Thu Mar 30 10:57:11 2017 user.info syslog: DslrDashboardServer starting
Thu Mar 30 10:57:11 2017 user.info syslog: Starting socket server on port 4757
Thu Mar 30 10:57:11 2017 user.info syslog: Awaiting client connection
Thu Mar 30 10:57:11 2017 user.info syslog: Starting UDP listener
Thu Mar 30 10:57:11 2017 user.info syslog: join multicast group: 224.1.2.3
Thu Mar 30 10:57:12 2017 daemon.info dnsmasq[1096]: started, version 2.73 cachesize 150
Thu Mar 30 10:57:12 2017 daemon.info dnsmasq[1096]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Thu Mar 30 10:57:12 2017 daemon.info dnsmasq[1096]: DNS service limited to local subnets
Thu Mar 30 10:57:12 2017 daemon.info dnsmasq-dhcp[1096]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Thu Mar 30 10:57:12 2017 daemon.info dnsmasq[1096]: using local addresses only for domain lan
Thu Mar 30 10:57:12 2017 daemon.warn dnsmasq[1096]: no servers found in /tmp/resolv.conf.auto, will retry
Thu Mar 30 10:57:12 2017 daemon.info dnsmasq[1096]: read /etc/hosts - 1 addresses
Thu Mar 30 10:57:12 2017 daemon.info dnsmasq[1096]: read /tmp/hosts/dhcp - 1 addresses
Thu Mar 30 10:57:12 2017 daemon.info dnsmasq-dhcp[1096]: read /etc/ethers - 0 addresses
Thu Mar 30 10:57:18 2017 daemon.info dnsmasq-dhcp[1096]: DHCPDISCOVER(br-lan) 1c:1b:0d:6b:d7:74 
Thu Mar 30 10:57:18 2017 daemon.info dnsmasq-dhcp[1096]: DHCPOFFER(br-lan) 192.168.1.240 1c:1b:0d:6b:d7:74 
Thu Mar 30 10:57:18 2017 daemon.info dnsmasq-dhcp[1096]: DHCPDISCOVER(br-lan) 1c:1b:0d:6b:d7:74 
Thu Mar 30 10:57:18 2017 daemon.info dnsmasq-dhcp[1096]: DHCPOFFER(br-lan) 192.168.1.240 1c:1b:0d:6b:d7:74 
Thu Mar 30 10:57:19 2017 daemon.info dnsmasq-dhcp[1096]: DHCPREQUEST(br-lan) 192.168.1.240 1c:1b:0d:6b:d7:74 
Thu Mar 30 10:57:19 2017 daemon.info dnsmasq-dhcp[1096]: DHCPACK(br-lan) 192.168.1.240 1c:1b:0d:6b:d7:74 iMac
Thu Mar 30 10:57:29 2017 kern.notice kernel: [   46.610000] random: nonblocking pool is initialized
Still dosen't work. Here is the log AFTER refreshing /flashing:

Code: Select all

Thu Mar 30 10:57:10 2017 kern.notice kernel: [    0.000000] Linux version 3.18.45 (hubaiz@vmmint) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49389) ) #1 Thu Mar 30 12:53:36 CEST 2017
Thu Mar 30 10:57:10 2017 kern.debug kernel: [    0.000000] MyLoader: sysp=0e150df8, boardp=46eb1d6d, parts=30c40fa1
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000] bootconsole [early0] enabled
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000] SoC: Atheros AR9330 rev 1
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000] Determined physical RAM map:
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000]  memory: 02000000 @ 00000000 (usable)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Thu Mar 30 10:57:10 2017 kern.warn kernel: [    0.000000] Zone ranges:
Thu Mar 30 10:57:10 2017 kern.warn kernel: [    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
Thu Mar 30 10:57:10 2017 kern.warn kernel: [    0.000000] Movable zone start for each node
Thu Mar 30 10:57:10 2017 kern.warn kernel: [    0.000000] Early memory node ranges
Thu Mar 30 10:57:10 2017 kern.warn kernel: [    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x00000000-0x01ffffff]
Thu Mar 30 10:57:10 2017 kern.debug kernel: [    0.000000] On node 0 totalpages: 8192
Thu Mar 30 10:57:10 2017 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 803660f0, node_mem_map 81000000
Thu Mar 30 10:57:10 2017 kern.debug kernel: [    0.000000]   Normal zone: 64 pages used for memmap
Thu Mar 30 10:57:10 2017 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Thu Mar 30 10:57:10 2017 kern.debug kernel: [    0.000000]   Normal zone: 8192 pages, LIFO batch:0
Thu Mar 30 10:57:10 2017 kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Thu Mar 30 10:57:10 2017 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Thu Mar 30 10:57:10 2017 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Thu Mar 30 10:57:10 2017 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 
Thu Mar 30 10:57:10 2017 kern.warn kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Thu Mar 30 10:57:10 2017 kern.notice kernel: [    0.000000] Kernel command line:  board=TL-MR3040-v2  console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000] Writing ErrCtl register=00000000
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000] Readback ErrCtl register=00000000
Thu Mar 30 10:57:10 2017 kern.warn kernel: [    0.000000] Memory: 28392K/32768K available (2523K kernel code, 143K rwdata, 540K rodata, 240K init, 188K bss, 4376K reserved)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000] NR_IRQS:51
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.080000] pid_max: default: 32768 minimum: 301
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.100000] NET: Registered protocol family 16
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.100000] MIPS: machine is TP-LINK TL-MR3040 v2
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.370000] Switched to clocksource MIPS
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.370000] NET: Registered protocol family 2
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.380000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.380000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.380000] TCP: Hash tables configured (established 1024 bind 1024)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.390000] TCP: reno registered
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.390000] UDP hash table entries: 256 (order: 0, 4096 bytes)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.400000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.410000] NET: Registered protocol family 1
Thu Mar 30 10:57:10 2017 kern.debug kernel: [    0.410000] PCI: CLS 0 bytes, default 32
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.410000] futex hash table entries: 256 (order: -1, 3072 bytes)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.430000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.430000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.440000] msgmni has been set to 55
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.460000] io scheduler noop registered
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.460000] io scheduler deadline registered (default)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.460000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.470000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a AR933X UART
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.480000] console [ttyATH0] enabled
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.490000] bootconsole [early0] disabled
Thu Mar 30 10:57:10 2017 kern.warn kernel: [    0.500000] m25p80 spi0.0: found w25q32, expected m25p80
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.500000] m25p80 spi0.0: w25q32 (4096 Kbytes)
Thu Mar 30 10:57:10 2017 kern.notice kernel: [    0.510000] 5 tp-link partitions found on MTD device spi0.0
Thu Mar 30 10:57:10 2017 kern.notice kernel: [    0.510000] Creating 5 MTD partitions on "spi0.0":
Thu Mar 30 10:57:10 2017 kern.notice kernel: [    0.520000] 0x000000000000-0x000000020000 : "u-boot"
Thu Mar 30 10:57:10 2017 kern.notice kernel: [    0.520000] 0x000000020000-0x00000013a9a8 : "kernel"
Thu Mar 30 10:57:10 2017 kern.notice kernel: [    0.530000] 0x00000013a9a8-0x0000003f0000 : "rootfs"
Thu Mar 30 10:57:10 2017 kern.notice kernel: [    0.530000] mtd: device 2 (rootfs) set to be root filesystem
Thu Mar 30 10:57:10 2017 kern.notice kernel: [    0.540000] 1 squashfs-split partitions found on MTD device rootfs
Thu Mar 30 10:57:10 2017 kern.notice kernel: [    0.540000] 0x000000380000-0x0000003f0000 : "rootfs_data"
Thu Mar 30 10:57:10 2017 kern.notice kernel: [    0.550000] 0x0000003f0000-0x000000400000 : "art"
Thu Mar 30 10:57:10 2017 kern.notice kernel: [    0.550000] 0x000000020000-0x0000003f0000 : "firmware"
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.580000] libphy: ag71xx_mdio: probed
Thu Mar 30 10:57:10 2017 kern.info kernel: [    1.170000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
Thu Mar 30 10:57:10 2017 kern.info kernel: [    1.180000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
Thu Mar 30 10:57:10 2017 kern.info kernel: [    1.180000] TCP: cubic registered
Thu Mar 30 10:57:10 2017 kern.info kernel: [    1.180000] NET: Registered protocol family 17
Thu Mar 30 10:57:10 2017 kern.info kernel: [    1.190000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Thu Mar 30 10:57:10 2017 kern.info kernel: [    1.200000] 8021q: 802.1Q VLAN Support v1.8
Thu Mar 30 10:57:10 2017 kern.info kernel: [    1.210000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Thu Mar 30 10:57:10 2017 kern.info kernel: [    1.220000] Freeing unused kernel memory: 240K (80384000 - 803c0000)
Thu Mar 30 10:57:10 2017 user.info kernel: [    2.540000] init: Console is alive
Thu Mar 30 10:57:10 2017 user.info kernel: [    2.540000] init: - watchdog -
Thu Mar 30 10:57:10 2017 kern.info kernel: [    3.950000] usbcore: registered new interface driver usbfs
Thu Mar 30 10:57:10 2017 kern.info kernel: [    3.950000] usbcore: registered new interface driver hub
Thu Mar 30 10:57:10 2017 kern.info kernel: [    3.960000] usbcore: registered new device driver usb
Thu Mar 30 10:57:10 2017 kern.info kernel: [    3.970000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Thu Mar 30 10:57:10 2017 kern.info kernel: [    3.970000] ehci-platform: EHCI generic platform driver
Thu Mar 30 10:57:10 2017 kern.info kernel: [    3.980000] ehci-platform ehci-platform: EHCI Host Controller
Thu Mar 30 10:57:10 2017 kern.info kernel: [    3.980000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Thu Mar 30 10:57:10 2017 kern.info kernel: [    3.990000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Thu Mar 30 10:57:10 2017 kern.info kernel: [    4.020000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Thu Mar 30 10:57:10 2017 kern.info kernel: [    4.020000] hub 1-0:1.0: USB hub found
Thu Mar 30 10:57:10 2017 kern.info kernel: [    4.020000] hub 1-0:1.0: 1 port detected
Thu Mar 30 10:57:10 2017 user.info kernel: [    4.690000] init: - preinit -
Thu Mar 30 10:57:10 2017 kern.notice kernel: [    5.520000] random: mktemp urandom read with 8 bits of entropy available
Thu Mar 30 10:57:10 2017 kern.info kernel: [    8.300000] eth0: link up (100Mbps/Full duplex)
Thu Mar 30 10:57:10 2017 kern.notice kernel: [    8.690000] jffs2: notice: (330) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Thu Mar 30 10:57:10 2017 user.info kernel: [    8.710000] mount_root: switching to jffs2 overlay
Thu Mar 30 10:57:10 2017 kern.info kernel: [    8.750000] eth0: link down
Thu Mar 30 10:57:10 2017 user.info kernel: [    8.760000] procd: - early -
Thu Mar 30 10:57:10 2017 user.info kernel: [    8.760000] procd: - watchdog -
Thu Mar 30 10:57:10 2017 user.info kernel: [    9.490000] procd: - ubus -
Thu Mar 30 10:57:10 2017 user.info kernel: [   10.500000] procd: - init -
Thu Mar 30 10:57:10 2017 kern.info kernel: [   11.520000] NET: Registered protocol family 10
Thu Mar 30 10:57:10 2017 kern.info kernel: [   11.530000] ip6_tables: (C) 2000-2006 Netfilter Core Team
Thu Mar 30 10:57:10 2017 kern.info kernel: [   11.550000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
Thu Mar 30 10:57:10 2017 kern.info kernel: [   11.560000] Backport generated by backports.git backports-20151218-0-g2f58d9d
Thu Mar 30 10:57:10 2017 kern.info kernel: [   11.570000] ip_tables: (C) 2000-2006 Netfilter Core Team
Thu Mar 30 10:57:10 2017 kern.info kernel: [   11.590000] nf_conntrack version 0.5.0 (447 buckets, 1788 max)
Thu Mar 30 10:57:10 2017 kern.info kernel: [   11.640000] xt_time: kernel timezone is -0000
Thu Mar 30 10:57:10 2017 kern.info kernel: [   11.760000] PPP generic driver version 2.4.2
Thu Mar 30 10:57:10 2017 kern.info kernel: [   11.760000] NET: Registered protocol family 24
Thu Mar 30 10:57:10 2017 kern.debug kernel: [   11.820000] ath: EEPROM regdomain: 0x0
Thu Mar 30 10:57:10 2017 kern.debug kernel: [   11.820000] ath: EEPROM indicates default country code should be used
Thu Mar 30 10:57:10 2017 kern.debug kernel: [   11.820000] ath: doing EEPROM country->regdmn map search
Thu Mar 30 10:57:10 2017 kern.debug kernel: [   11.820000] ath: country maps to regdmn code: 0x3a
Thu Mar 30 10:57:10 2017 kern.debug kernel: [   11.820000] ath: Country alpha2 being used: US
Thu Mar 30 10:57:10 2017 kern.debug kernel: [   11.820000] ath: Regpair used: 0x3a
Thu Mar 30 10:57:10 2017 kern.debug kernel: [   11.830000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Thu Mar 30 10:57:10 2017 kern.info kernel: [   11.840000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
Thu Mar 30 10:57:15 2017 kern.info kernel: [   20.100000] device eth0 entered promiscuous mode
Thu Mar 30 10:57:15 2017 kern.info kernel: [   20.100000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Thu Mar 30 10:57:15 2017 daemon.notice netifd: Interface 'lan' is enabled
Thu Mar 30 10:57:15 2017 daemon.notice netifd: Interface 'lan' is setting up now
Thu Mar 30 10:57:15 2017 daemon.notice netifd: Interface 'lan' is now up
Thu Mar 30 10:57:15 2017 daemon.notice netifd: Interface 'loopback' is enabled
Thu Mar 30 10:57:15 2017 daemon.notice netifd: Interface 'loopback' is setting up now
Thu Mar 30 10:57:15 2017 daemon.notice netifd: Interface 'loopback' is now up
Thu Mar 30 10:57:15 2017 daemon.notice netifd: Network device 'lo' link is up
Thu Mar 30 10:57:15 2017 daemon.notice netifd: Interface 'loopback' has link connectivity 
Thu Mar 30 10:57:17 2017 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Thu Mar 30 10:57:17 2017 authpriv.info dropbear[808]: Not backgrounding
Thu Mar 30 10:57:18 2017 kern.info kernel: [   23.050000] eth0: link up (100Mbps/Full duplex)
Thu Mar 30 10:57:18 2017 kern.info kernel: [   23.050000] br-lan: port 1(eth0) entered forwarding state
Thu Mar 30 10:57:18 2017 kern.info kernel: [   23.060000] br-lan: port 1(eth0) entered forwarding state
Thu Mar 30 10:57:18 2017 daemon.notice netifd: Network device 'eth0' link is up
Thu Mar 30 10:57:18 2017 daemon.notice netifd: Bridge 'br-lan' link is up
Thu Mar 30 10:57:18 2017 daemon.notice netifd: Interface 'lan' has link connectivity 
Thu Mar 30 10:57:18 2017 kern.info kernel: [   23.080000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Thu Mar 30 10:57:18 2017 daemon.notice netifd: radio0 (776): Configuration file: /var/run/hostapd-phy0.conf
Thu Mar 30 10:57:18 2017 kern.info kernel: [   23.280000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Thu Mar 30 10:57:19 2017 kern.info kernel: [   23.310000] device wlan0 entered promiscuous mode
Thu Mar 30 10:57:19 2017 kern.info kernel: [   23.310000] br-lan: port 2(wlan0) entered forwarding state
Thu Mar 30 10:57:19 2017 kern.info kernel: [   23.320000] br-lan: port 2(wlan0) entered forwarding state
Thu Mar 30 10:57:19 2017 daemon.notice netifd: radio0 (776): wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Thu Mar 30 10:57:19 2017 daemon.notice netifd: radio0 (776): Using interface wlan0 with hwaddr 18:d6:c7:8e:a0:ac and ssid "DDServerAP"
Thu Mar 30 10:57:19 2017 kern.info kernel: [   23.360000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Thu Mar 30 10:57:19 2017 daemon.notice netifd: radio0 (776): wlan0: interface state COUNTRY_UPDATE->ENABLED
Thu Mar 30 10:57:19 2017 daemon.notice netifd: radio0 (776): wlan0: AP-ENABLED 
Thu Mar 30 10:57:19 2017 daemon.notice netifd: Network device 'wlan0' link is up
Thu Mar 30 10:57:20 2017 user.emerg syslog: setting up led USB
Thu Mar 30 10:57:20 2017 user.emerg syslog: setting up led WLAN
Thu Mar 30 10:57:20 2017 user.emerg syslog: setting up led LAN
Thu Mar 30 10:57:20 2017 user.emerg syslog: start
Thu Mar 30 10:57:20 2017 user.emerg syslog: Saving PID 991  to  /var/run/ddserver.pid
Thu Mar 30 10:57:20 2017 user.emerg syslog: Ok
Thu Mar 30 10:57:20 2017 daemon.info procd: - init complete -
Thu Mar 30 10:57:20 2017 kern.info kernel: [   25.060000] br-lan: port 1(eth0) entered forwarding state
Thu Mar 30 10:57:20 2017 user.info syslog: DslrDashboardServer starting
Thu Mar 30 10:57:20 2017 user.info syslog: Starting socket server on port 4757
Thu Mar 30 10:57:20 2017 user.info syslog: Awaiting client connection
Thu Mar 30 10:57:20 2017 user.info syslog: Starting UDP listener
Thu Mar 30 10:57:20 2017 user.info syslog: join multicast group: 224.1.2.3
Thu Mar 30 10:57:21 2017 kern.info kernel: [   25.320000] br-lan: port 2(wlan0) entered forwarding state
Thu Mar 30 10:57:23 2017 daemon.info dnsmasq[1005]: started, version 2.73 cachesize 150
Thu Mar 30 10:57:23 2017 daemon.info dnsmasq[1005]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Thu Mar 30 10:57:23 2017 daemon.info dnsmasq[1005]: DNS service limited to local subnets
Thu Mar 30 10:57:23 2017 daemon.info dnsmasq-dhcp[1005]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Thu Mar 30 10:57:23 2017 daemon.info dnsmasq[1005]: using local addresses only for domain lan
Thu Mar 30 10:57:23 2017 daemon.warn dnsmasq[1005]: no servers found in /tmp/resolv.conf.auto, will retry
Thu Mar 30 10:57:23 2017 daemon.info dnsmasq[1005]: read /etc/hosts - 1 addresses
Thu Mar 30 10:57:23 2017 daemon.info dnsmasq[1005]: read /tmp/hosts/dhcp - 1 addresses
Thu Mar 30 10:57:23 2017 daemon.info dnsmasq-dhcp[1005]: read /etc/ethers - 0 addresses
Thu Mar 30 10:57:29 2017 daemon.info dnsmasq-dhcp[1005]: DHCPDISCOVER(br-lan) 1c:1b:0d:6b:d7:74 
Thu Mar 30 10:57:29 2017 daemon.info dnsmasq-dhcp[1005]: DHCPOFFER(br-lan) 192.168.1.240 1c:1b:0d:6b:d7:74 
Thu Mar 30 10:57:29 2017 daemon.info dnsmasq-dhcp[1005]: DHCPDISCOVER(br-lan) 1c:1b:0d:6b:d7:74 
Thu Mar 30 10:57:29 2017 daemon.info dnsmasq-dhcp[1005]: DHCPOFFER(br-lan) 192.168.1.240 1c:1b:0d:6b:d7:74 
Thu Mar 30 10:57:30 2017 daemon.info dnsmasq-dhcp[1005]: DHCPREQUEST(br-lan) 192.168.1.240 1c:1b:0d:6b:d7:74 
Thu Mar 30 10:57:30 2017 daemon.info dnsmasq-dhcp[1005]: DHCPACK(br-lan) 192.168.1.240 1c:1b:0d:6b:d7:74 iMac
Thu Mar 30 10:57:41 2017 kern.notice kernel: [   45.650000] random: nonblocking pool is initialized
Not one thing has changed -- and BTW... I had already tried this procedure twice before you suggested it. Any other options? Is a refund possible - I have no need for the tool if the wireless function dosen't work. It's not a lot of money and if you say no, so bet it, but I already have a wired solution, and unfortunately, we've made zero progress with your suggestions. Thank you.
Top
hubaiz
Site Admin
Posts: 2003
Joined: 27 Jan 2015, 18:58

Re: Can't Connect to DDServer Canon 650D w/Android

Post by hubaiz »

From these log files I don't see at all that you connected your camera and turned on.
I only see that ddserver is started.
Either your router is damaged or the USB cable you are using is wrong or to long.
Also be sure that you don't use some sort of USB OTG adapter for the USB connection.
Top
acme
Posts: 7
Joined: 28 Jan 2018, 19:10

Re: Can't Connect to DDServer Canon 650D w/Android

Post by acme »

#1) I already mentioned that I have purchased a New Cable that is 1' (foot) long. That's the shortest I can find.

#2) I also mentioned that I am NOT using an OTG cable.

#3) New syslog from this a.m. -- (Copied and pasted with camera connected and powered on. -- Thanks for trying to help.

Code: Select all

Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000] SoC: Atheros AR9330 rev 1
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000] Determined physical RAM map:
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000]  memory: 02000000 @ 00000000 (usable)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Thu Mar 30 10:57:10 2017 kern.warn kernel: [    0.000000] Zone ranges:
Thu Mar 30 10:57:10 2017 kern.warn kernel: [    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
Thu Mar 30 10:57:10 2017 kern.warn kernel: [    0.000000] Movable zone start for each node
Thu Mar 30 10:57:10 2017 kern.warn kernel: [    0.000000] Early memory node ranges
Thu Mar 30 10:57:10 2017 kern.warn kernel: [    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x00000000-0x01ffffff]
Thu Mar 30 10:57:10 2017 kern.debug kernel: [    0.000000] On node 0 totalpages: 8192
Thu Mar 30 10:57:10 2017 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 803660f0, node_mem_map 81000000
Thu Mar 30 10:57:10 2017 kern.debug kernel: [    0.000000]   Normal zone: 64 pages used for memmap
Thu Mar 30 10:57:10 2017 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Thu Mar 30 10:57:10 2017 kern.debug kernel: [    0.000000]   Normal zone: 8192 pages, LIFO batch:0
Thu Mar 30 10:57:10 2017 kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Thu Mar 30 10:57:10 2017 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Thu Mar 30 10:57:10 2017 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Thu Mar 30 10:57:10 2017 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 
Thu Mar 30 10:57:10 2017 kern.warn kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Thu Mar 30 10:57:10 2017 kern.notice kernel: [    0.000000] Kernel command line:  board=TL-MR3040-v2  console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000] Writing ErrCtl register=00000000
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000] Readback ErrCtl register=00000000
Thu Mar 30 10:57:10 2017 kern.warn kernel: [    0.000000] Memory: 28392K/32768K available (2523K kernel code, 143K rwdata, 540K rodata, 240K init, 188K bss, 4376K reserved)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000] NR_IRQS:51
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.080000] pid_max: default: 32768 minimum: 301
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.100000] NET: Registered protocol family 16
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.100000] MIPS: machine is TP-LINK TL-MR3040 v2
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.370000] Switched to clocksource MIPS
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.370000] NET: Registered protocol family 2
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.380000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.380000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.380000] TCP: Hash tables configured (established 1024 bind 1024)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.390000] TCP: reno registered
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.390000] UDP hash table entries: 256 (order: 0, 4096 bytes)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.400000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.410000] NET: Registered protocol family 1
Thu Mar 30 10:57:10 2017 kern.debug kernel: [    0.410000] PCI: CLS 0 bytes, default 32
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.410000] futex hash table entries: 256 (order: -1, 3072 bytes)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.430000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.430000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.440000] msgmni has been set to 55
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.460000] io scheduler noop registered
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.460000] io scheduler deadline registered (default)
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.460000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.470000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a AR933X UART
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.480000] console [ttyATH0] enabled
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.490000] bootconsole [early0] disabled
Thu Mar 30 10:57:10 2017 kern.warn kernel: [    0.500000] m25p80 spi0.0: found w25q32, expected m25p80
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.500000] m25p80 spi0.0: w25q32 (4096 Kbytes)
Thu Mar 30 10:57:10 2017 kern.notice kernel: [    0.510000] 5 tp-link partitions found on MTD device spi0.0
Thu Mar 30 10:57:10 2017 kern.notice kernel: [    0.510000] Creating 5 MTD partitions on "spi0.0":
Thu Mar 30 10:57:10 2017 kern.notice kernel: [    0.520000] 0x000000000000-0x000000020000 : "u-boot"
Thu Mar 30 10:57:10 2017 kern.notice kernel: [    0.520000] 0x000000020000-0x00000013a9a8 : "kernel"
Thu Mar 30 10:57:10 2017 kern.notice kernel: [    0.530000] 0x00000013a9a8-0x0000003f0000 : "rootfs"
Thu Mar 30 10:57:10 2017 kern.notice kernel: [    0.530000] mtd: device 2 (rootfs) set to be root filesystem
Thu Mar 30 10:57:10 2017 kern.notice kernel: [    0.540000] 1 squashfs-split partitions found on MTD device rootfs
Thu Mar 30 10:57:10 2017 kern.notice kernel: [    0.540000] 0x000000380000-0x0000003f0000 : "rootfs_data"
Thu Mar 30 10:57:10 2017 kern.notice kernel: [    0.550000] 0x0000003f0000-0x000000400000 : "art"
Thu Mar 30 10:57:10 2017 kern.notice kernel: [    0.550000] 0x000000020000-0x0000003f0000 : "firmware"
Thu Mar 30 10:57:10 2017 kern.info kernel: [    0.580000] libphy: ag71xx_mdio: probed
Thu Mar 30 10:57:10 2017 kern.info kernel: [    1.170000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
Thu Mar 30 10:57:10 2017 kern.info kernel: [    1.180000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
Thu Mar 30 10:57:10 2017 kern.info kernel: [    1.180000] TCP: cubic registered
Thu Mar 30 10:57:10 2017 kern.info kernel: [    1.180000] NET: Registered protocol family 17
Thu Mar 30 10:57:10 2017 kern.info kernel: [    1.190000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Thu Mar 30 10:57:10 2017 kern.info kernel: [    1.200000] 8021q: 802.1Q VLAN Support v1.8
Thu Mar 30 10:57:10 2017 kern.info kernel: [    1.210000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Thu Mar 30 10:57:10 2017 kern.info kernel: [    1.220000] Freeing unused kernel memory: 240K (80384000 - 803c0000)
Thu Mar 30 10:57:10 2017 user.info kernel: [    2.540000] init: Console is alive
Thu Mar 30 10:57:10 2017 user.info kernel: [    2.540000] init: - watchdog -
Thu Mar 30 10:57:10 2017 kern.info kernel: [    3.950000] usbcore: registered new interface driver usbfs
Thu Mar 30 10:57:10 2017 kern.info kernel: [    3.950000] usbcore: registered new interface driver hub
Thu Mar 30 10:57:10 2017 kern.info kernel: [    3.960000] usbcore: registered new device driver usb
Thu Mar 30 10:57:10 2017 kern.info kernel: [    3.970000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Thu Mar 30 10:57:10 2017 kern.info kernel: [    3.970000] ehci-platform: EHCI generic platform driver
Thu Mar 30 10:57:10 2017 kern.info kernel: [    3.980000] ehci-platform ehci-platform: EHCI Host Controller
Thu Mar 30 10:57:10 2017 kern.info kernel: [    3.980000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Thu Mar 30 10:57:10 2017 kern.info kernel: [    3.990000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Thu Mar 30 10:57:10 2017 kern.info kernel: [    4.020000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Thu Mar 30 10:57:10 2017 kern.info kernel: [    4.020000] hub 1-0:1.0: USB hub found
Thu Mar 30 10:57:10 2017 kern.info kernel: [    4.020000] hub 1-0:1.0: 1 port detected
Thu Mar 30 10:57:10 2017 user.info kernel: [    4.620000] init: - preinit -
Thu Mar 30 10:57:10 2017 kern.notice kernel: [    5.450000] random: mktemp urandom read with 8 bits of entropy available
Thu Mar 30 10:57:10 2017 kern.notice kernel: [    8.630000] jffs2: notice: (331) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Thu Mar 30 10:57:10 2017 user.info kernel: [    8.650000] mount_root: switching to jffs2 overlay
Thu Mar 30 10:57:10 2017 user.info kernel: [    8.700000] procd: - early -
Thu Mar 30 10:57:10 2017 user.info kernel: [    8.700000] procd: - watchdog -
Thu Mar 30 10:57:10 2017 user.info kernel: [    9.400000] procd: - ubus -
Thu Mar 30 10:57:10 2017 user.info kernel: [   10.410000] procd: - init -
Thu Mar 30 10:57:10 2017 kern.info kernel: [   11.420000] NET: Registered protocol family 10
Thu Mar 30 10:57:10 2017 kern.info kernel: [   11.440000] ip6_tables: (C) 2000-2006 Netfilter Core Team
Thu Mar 30 10:57:10 2017 kern.info kernel: [   11.460000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
Thu Mar 30 10:57:10 2017 kern.info kernel: [   11.470000] Backport generated by backports.git backports-20151218-0-g2f58d9d
Thu Mar 30 10:57:10 2017 kern.info kernel: [   11.480000] ip_tables: (C) 2000-2006 Netfilter Core Team
Thu Mar 30 10:57:10 2017 kern.info kernel: [   11.490000] nf_conntrack version 0.5.0 (447 buckets, 1788 max)
Thu Mar 30 10:57:10 2017 kern.info kernel: [   11.550000] xt_time: kernel timezone is -0000
Thu Mar 30 10:57:10 2017 kern.info kernel: [   11.660000] PPP generic driver version 2.4.2
Thu Mar 30 10:57:10 2017 kern.info kernel: [   11.670000] NET: Registered protocol family 24
Thu Mar 30 10:57:10 2017 kern.debug kernel: [   11.730000] ath: EEPROM regdomain: 0x0
Thu Mar 30 10:57:10 2017 kern.debug kernel: [   11.730000] ath: EEPROM indicates default country code should be used
Thu Mar 30 10:57:10 2017 kern.debug kernel: [   11.730000] ath: doing EEPROM country->regdmn map search
Thu Mar 30 10:57:10 2017 kern.debug kernel: [   11.730000] ath: country maps to regdmn code: 0x3a
Thu Mar 30 10:57:10 2017 kern.debug kernel: [   11.730000] ath: Country alpha2 being used: US
Thu Mar 30 10:57:10 2017 kern.debug kernel: [   11.730000] ath: Regpair used: 0x3a
Thu Mar 30 10:57:10 2017 kern.debug kernel: [   11.740000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Thu Mar 30 10:57:10 2017 kern.info kernel: [   11.750000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
Thu Mar 30 10:57:15 2017 kern.info kernel: [   19.970000] device eth0 entered promiscuous mode
Thu Mar 30 10:57:15 2017 kern.info kernel: [   19.970000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Thu Mar 30 10:57:15 2017 daemon.notice netifd: Interface 'lan' is enabled
Thu Mar 30 10:57:15 2017 daemon.notice netifd: Interface 'lan' is setting up now
Thu Mar 30 10:57:15 2017 daemon.notice netifd: Interface 'lan' is now up
Thu Mar 30 10:57:15 2017 daemon.notice netifd: Interface 'loopback' is enabled
Thu Mar 30 10:57:15 2017 daemon.notice netifd: Interface 'loopback' is setting up now
Thu Mar 30 10:57:15 2017 daemon.notice netifd: Interface 'loopback' is now up
Thu Mar 30 10:57:15 2017 daemon.notice netifd: Network device 'lo' link is up
Thu Mar 30 10:57:15 2017 daemon.notice netifd: Interface 'loopback' has link connectivity 
Thu Mar 30 10:57:16 2017 authpriv.info dropbear[810]: Not backgrounding
Thu Mar 30 10:57:17 2017 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Thu Mar 30 10:57:19 2017 daemon.notice netifd: radio0 (776): Configuration file: /var/run/hostapd-phy0.conf
Thu Mar 30 10:57:19 2017 kern.info kernel: [   23.760000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Thu Mar 30 10:57:19 2017 kern.info kernel: [   23.790000] device wlan0 entered promiscuous mode
Thu Mar 30 10:57:19 2017 kern.info kernel: [   23.790000] br-lan: port 2(wlan0) entered forwarding state
Thu Mar 30 10:57:19 2017 kern.info kernel: [   23.800000] br-lan: port 2(wlan0) entered forwarding state
Thu Mar 30 10:57:19 2017 daemon.notice netifd: radio0 (776): wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Thu Mar 30 10:57:19 2017 daemon.notice netifd: radio0 (776): Using interface wlan0 with hwaddr 18:d6:c7:8e:a0:ac and ssid "DDServerAP"
Thu Mar 30 10:57:19 2017 daemon.notice netifd: radio0 (776): wlan0: interface state COUNTRY_UPDATE->ENABLED
Thu Mar 30 10:57:19 2017 daemon.notice netifd: radio0 (776): wlan0: AP-ENABLED 
Thu Mar 30 10:57:19 2017 kern.info kernel: [   24.040000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Thu Mar 30 10:57:19 2017 kern.info kernel: [   24.040000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Thu Mar 30 10:57:19 2017 daemon.notice netifd: Bridge 'br-lan' link is up
Thu Mar 30 10:57:19 2017 daemon.notice netifd: Interface 'lan' has link connectivity 
Thu Mar 30 10:57:20 2017 user.emerg syslog: setting up led USB
Thu Mar 30 10:57:20 2017 user.emerg syslog: setting up led WLAN
Thu Mar 30 10:57:20 2017 user.emerg syslog: setting up led LAN
Thu Mar 30 10:57:20 2017 daemon.notice netifd: Network device 'wlan0' link is up
Thu Mar 30 10:57:20 2017 user.emerg syslog: start
Thu Mar 30 10:57:20 2017 user.emerg syslog: Saving PID 991  to  /var/run/ddserver.pid
Thu Mar 30 10:57:20 2017 user.emerg syslog: Ok
Thu Mar 30 10:57:20 2017 daemon.info procd: - init complete -
Thu Mar 30 10:57:20 2017 user.info syslog: DslrDashboardServer starting
Thu Mar 30 10:57:20 2017 user.info syslog: Starting socket server on port 4757
Thu Mar 30 10:57:20 2017 user.info syslog: Awaiting client connection
Thu Mar 30 10:57:20 2017 user.info syslog: Starting UDP listener
Thu Mar 30 10:57:20 2017 user.info syslog: join multicast group: 224.1.2.3
Thu Mar 30 10:57:21 2017 kern.info kernel: [   25.800000] br-lan: port 2(wlan0) entered forwarding state
Thu Mar 30 10:57:23 2017 daemon.info dnsmasq[1006]: started, version 2.73 cachesize 150
Thu Mar 30 10:57:23 2017 daemon.info dnsmasq[1006]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Thu Mar 30 10:57:23 2017 daemon.info dnsmasq[1006]: DNS service limited to local subnets
Thu Mar 30 10:57:23 2017 daemon.info dnsmasq-dhcp[1006]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Thu Mar 30 10:57:23 2017 daemon.info dnsmasq[1006]: using local addresses only for domain lan
Thu Mar 30 10:57:23 2017 daemon.warn dnsmasq[1006]: no servers found in /tmp/resolv.conf.auto, will retry
Thu Mar 30 10:57:23 2017 daemon.info dnsmasq[1006]: read /etc/hosts - 1 addresses
Thu Mar 30 10:57:23 2017 daemon.info dnsmasq[1006]: read /tmp/hosts/dhcp - 1 addresses
Thu Mar 30 10:57:23 2017 daemon.info dnsmasq-dhcp[1006]: read /etc/ethers - 0 addresses
Thu Mar 30 10:57:44 2017 kern.notice kernel: [   49.140000] random: nonblocking pool is initialized
Thu Mar 30 10:58:31 2017 kern.info kernel: [   95.980000] usb 1-1: new high-speed USB device number 2 using ehci-platform
Thu Mar 30 10:58:42 2017 kern.err kernel: [  106.570000] usb 1-1: device not accepting address 2, error -145
Thu Mar 30 10:58:42 2017 kern.info kernel: [  106.690000] usb 1-1: new high-speed USB device number 3 using ehci-platform
Thu Mar 30 10:58:47 2017 kern.info kernel: [  111.580000] usb 1-1: new high-speed USB device number 4 using ehci-platform
Thu Mar 30 10:58:52 2017 kern.err kernel: [  116.700000] usb 1-1: device descriptor read/64, error -145
Thu Mar 30 10:59:07 2017 kern.err kernel: [  131.930000] usb 1-1: device descriptor read/64, error -145
Thu Mar 30 10:59:07 2017 kern.info kernel: [  132.160000] usb 1-1: new high-speed USB device number 5 using ehci-platform
Thu Mar 30 10:59:11 2017 daemon.info hostapd: wlan0: STA 34:14:5f:c4:36:5b IEEE 802.11: authenticated
Thu Mar 30 10:59:11 2017 daemon.info hostapd: wlan0: STA 34:14:5f:c4:36:5b IEEE 802.11: associated (aid 1)
Thu Mar 30 10:59:13 2017 kern.err kernel: [  137.280000] usb 1-1: device descriptor read/64, error -145
Thu Mar 30 10:59:14 2017 daemon.info dnsmasq-dhcp[1006]: DHCPDISCOVER(br-lan) 34:14:5f:c4:36:5b 
Thu Mar 30 10:59:14 2017 daemon.info dnsmasq-dhcp[1006]: DHCPOFFER(br-lan) 192.168.1.207 34:14:5f:c4:36:5b 
Thu Mar 30 10:59:14 2017 daemon.info dnsmasq-dhcp[1006]: DHCPDISCOVER(br-lan) 34:14:5f:c4:36:5b 
Thu Mar 30 10:59:14 2017 daemon.info dnsmasq-dhcp[1006]: DHCPOFFER(br-lan) 192.168.1.207 34:14:5f:c4:36:5b 
Thu Mar 30 10:59:14 2017 daemon.info dnsmasq-dhcp[1006]: DHCPREQUEST(br-lan) 192.168.1.207 34:14:5f:c4:36:5b 
Thu Mar 30 10:59:14 2017 daemon.info dnsmasq-dhcp[1006]: DHCPACK(br-lan) 192.168.1.207 34:14:5f:c4:36:5b Galaxy-Tab-A
Thu Mar 30 10:59:28 2017 kern.err kernel: [  152.510000] usb 1-1: device descriptor read/64, error -145
Thu Mar 30 10:59:28 2017 kern.info kernel: [  152.740000] usb 1-1: new high-speed USB device number 6 using ehci-platform
Thu Mar 30 10:59:38 2017 kern.err kernel: [  163.160000] usb 1-1: device not accepting address 6, error -145
Thu Mar 30 10:59:39 2017 kern.info kernel: [  163.280000] usb 1-1: new high-speed USB device number 7 using ehci-platform
Thu Mar 30 10:59:49 2017 kern.err kernel: [  173.700000] usb 1-1: device not accepting address 7, error -145
Thu Mar 30 10:59:49 2017 kern.err kernel: [  173.700000] usb usb1-port1: unable to enumerate USB device
Thu Mar 30 11:05:21 2017 kern.info kernel: [  505.380000] usb 1-1: new high-speed USB device number 8 using ehci-platform
Thu Mar 30 11:05:26 2017 kern.err kernel: [  510.500000] usb 1-1: device descriptor read/64, error -145
Second Attempt This Morning

Code: Select all

Thu Mar 30 10:57:10 2017 kern.info kernel: [    1.180000] TCP: cubic registered
Thu Mar 30 10:57:10 2017 kern.info kernel: [    1.180000] NET: Registered protocol family 17
Thu Mar 30 10:57:10 2017 kern.info kernel: [    1.190000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Thu Mar 30 10:57:10 2017 kern.info kernel: [    1.200000] 8021q: 802.1Q VLAN Support v1.8
Thu Mar 30 10:57:10 2017 kern.info kernel: [    1.210000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Thu Mar 30 10:57:10 2017 kern.info kernel: [    1.220000] Freeing unused kernel memory: 240K (80384000 - 803c0000)
Thu Mar 30 10:57:10 2017 user.info kernel: [    2.540000] init: Console is alive
Thu Mar 30 10:57:10 2017 user.info kernel: [    2.540000] init: - watchdog -
Thu Mar 30 10:57:10 2017 kern.info kernel: [    3.950000] usbcore: registered new interface driver usbfs
Thu Mar 30 10:57:10 2017 kern.info kernel: [    3.950000] usbcore: registered new interface driver hub
Thu Mar 30 10:57:10 2017 kern.info kernel: [    3.960000] usbcore: registered new device driver usb
Thu Mar 30 10:57:10 2017 kern.info kernel: [    3.970000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Thu Mar 30 10:57:10 2017 kern.info kernel: [    3.970000] ehci-platform: EHCI generic platform driver
Thu Mar 30 10:57:10 2017 kern.info kernel: [    3.980000] ehci-platform ehci-platform: EHCI Host Controller
Thu Mar 30 10:57:10 2017 kern.info kernel: [    3.980000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Thu Mar 30 10:57:10 2017 kern.info kernel: [    3.990000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Thu Mar 30 10:57:10 2017 kern.info kernel: [    4.020000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Thu Mar 30 10:57:10 2017 kern.info kernel: [    4.020000] hub 1-0:1.0: USB hub found
Thu Mar 30 10:57:10 2017 kern.info kernel: [    4.020000] hub 1-0:1.0: 1 port detected
Thu Mar 30 10:57:10 2017 user.info kernel: [    4.620000] init: - preinit -
Thu Mar 30 10:57:10 2017 kern.notice kernel: [    5.450000] random: mktemp urandom read with 8 bits of entropy available
Thu Mar 30 10:57:10 2017 kern.notice kernel: [    8.630000] jffs2: notice: (331) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Thu Mar 30 10:57:10 2017 user.info kernel: [    8.650000] mount_root: switching to jffs2 overlay
Thu Mar 30 10:57:10 2017 user.info kernel: [    8.700000] procd: - early -
Thu Mar 30 10:57:10 2017 user.info kernel: [    8.700000] procd: - watchdog -
Thu Mar 30 10:57:10 2017 user.info kernel: [    9.400000] procd: - ubus -
Thu Mar 30 10:57:10 2017 user.info kernel: [   10.410000] procd: - init -
Thu Mar 30 10:57:10 2017 kern.info kernel: [   11.420000] NET: Registered protocol family 10
Thu Mar 30 10:57:10 2017 kern.info kernel: [   11.440000] ip6_tables: (C) 2000-2006 Netfilter Core Team
Thu Mar 30 10:57:10 2017 kern.info kernel: [   11.460000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
Thu Mar 30 10:57:10 2017 kern.info kernel: [   11.470000] Backport generated by backports.git backports-20151218-0-g2f58d9d
Thu Mar 30 10:57:10 2017 kern.info kernel: [   11.480000] ip_tables: (C) 2000-2006 Netfilter Core Team
Thu Mar 30 10:57:10 2017 kern.info kernel: [   11.490000] nf_conntrack version 0.5.0 (447 buckets, 1788 max)
Thu Mar 30 10:57:10 2017 kern.info kernel: [   11.550000] xt_time: kernel timezone is -0000
Thu Mar 30 10:57:10 2017 kern.info kernel: [   11.660000] PPP generic driver version 2.4.2
Thu Mar 30 10:57:10 2017 kern.info kernel: [   11.670000] NET: Registered protocol family 24
Thu Mar 30 10:57:10 2017 kern.debug kernel: [   11.730000] ath: EEPROM regdomain: 0x0
Thu Mar 30 10:57:10 2017 kern.debug kernel: [   11.730000] ath: EEPROM indicates default country code should be used
Thu Mar 30 10:57:10 2017 kern.debug kernel: [   11.730000] ath: doing EEPROM country->regdmn map search
Thu Mar 30 10:57:10 2017 kern.debug kernel: [   11.730000] ath: country maps to regdmn code: 0x3a
Thu Mar 30 10:57:10 2017 kern.debug kernel: [   11.730000] ath: Country alpha2 being used: US
Thu Mar 30 10:57:10 2017 kern.debug kernel: [   11.730000] ath: Regpair used: 0x3a
Thu Mar 30 10:57:10 2017 kern.debug kernel: [   11.740000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Thu Mar 30 10:57:10 2017 kern.info kernel: [   11.750000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
Thu Mar 30 10:57:15 2017 kern.info kernel: [   19.970000] device eth0 entered promiscuous mode
Thu Mar 30 10:57:15 2017 kern.info kernel: [   19.970000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Thu Mar 30 10:57:15 2017 daemon.notice netifd: Interface 'lan' is enabled
Thu Mar 30 10:57:15 2017 daemon.notice netifd: Interface 'lan' is setting up now
Thu Mar 30 10:57:15 2017 daemon.notice netifd: Interface 'lan' is now up
Thu Mar 30 10:57:15 2017 daemon.notice netifd: Interface 'loopback' is enabled
Thu Mar 30 10:57:15 2017 daemon.notice netifd: Interface 'loopback' is setting up now
Thu Mar 30 10:57:15 2017 daemon.notice netifd: Interface 'loopback' is now up
Thu Mar 30 10:57:15 2017 daemon.notice netifd: Network device 'lo' link is up
Thu Mar 30 10:57:15 2017 daemon.notice netifd: Interface 'loopback' has link connectivity 
Thu Mar 30 10:57:16 2017 authpriv.info dropbear[810]: Not backgrounding
Thu Mar 30 10:57:17 2017 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Thu Mar 30 10:57:19 2017 daemon.notice netifd: radio0 (776): Configuration file: /var/run/hostapd-phy0.conf
Thu Mar 30 10:57:19 2017 kern.info kernel: [   23.760000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Thu Mar 30 10:57:19 2017 kern.info kernel: [   23.790000] device wlan0 entered promiscuous mode
Thu Mar 30 10:57:19 2017 kern.info kernel: [   23.790000] br-lan: port 2(wlan0) entered forwarding state
Thu Mar 30 10:57:19 2017 kern.info kernel: [   23.800000] br-lan: port 2(wlan0) entered forwarding state
Thu Mar 30 10:57:19 2017 daemon.notice netifd: radio0 (776): wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Thu Mar 30 10:57:19 2017 daemon.notice netifd: radio0 (776): Using interface wlan0 with hwaddr 18:d6:c7:8e:a0:ac and ssid "DDServerAP"
Thu Mar 30 10:57:19 2017 daemon.notice netifd: radio0 (776): wlan0: interface state COUNTRY_UPDATE->ENABLED
Thu Mar 30 10:57:19 2017 daemon.notice netifd: radio0 (776): wlan0: AP-ENABLED 
Thu Mar 30 10:57:19 2017 kern.info kernel: [   24.040000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Thu Mar 30 10:57:19 2017 kern.info kernel: [   24.040000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Thu Mar 30 10:57:19 2017 daemon.notice netifd: Bridge 'br-lan' link is up
Thu Mar 30 10:57:19 2017 daemon.notice netifd: Interface 'lan' has link connectivity 
Thu Mar 30 10:57:20 2017 user.emerg syslog: setting up led USB
Thu Mar 30 10:57:20 2017 user.emerg syslog: setting up led WLAN
Thu Mar 30 10:57:20 2017 user.emerg syslog: setting up led LAN
Thu Mar 30 10:57:20 2017 daemon.notice netifd: Network device 'wlan0' link is up
Thu Mar 30 10:57:20 2017 user.emerg syslog: start
Thu Mar 30 10:57:20 2017 user.emerg syslog: Saving PID 991  to  /var/run/ddserver.pid
Thu Mar 30 10:57:20 2017 user.emerg syslog: Ok
Thu Mar 30 10:57:20 2017 daemon.info procd: - init complete -
Thu Mar 30 10:57:20 2017 user.info syslog: DslrDashboardServer starting
Thu Mar 30 10:57:20 2017 user.info syslog: Starting socket server on port 4757
Thu Mar 30 10:57:20 2017 user.info syslog: Awaiting client connection
Thu Mar 30 10:57:20 2017 user.info syslog: Starting UDP listener
Thu Mar 30 10:57:20 2017 user.info syslog: join multicast group: 224.1.2.3
Thu Mar 30 10:57:21 2017 kern.info kernel: [   25.800000] br-lan: port 2(wlan0) entered forwarding state
Thu Mar 30 10:57:23 2017 daemon.info dnsmasq[1006]: started, version 2.73 cachesize 150
Thu Mar 30 10:57:23 2017 daemon.info dnsmasq[1006]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Thu Mar 30 10:57:23 2017 daemon.info dnsmasq[1006]: DNS service limited to local subnets
Thu Mar 30 10:57:23 2017 daemon.info dnsmasq-dhcp[1006]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Thu Mar 30 10:57:23 2017 daemon.info dnsmasq[1006]: using local addresses only for domain lan
Thu Mar 30 10:57:23 2017 daemon.warn dnsmasq[1006]: no servers found in /tmp/resolv.conf.auto, will retry
Thu Mar 30 10:57:23 2017 daemon.info dnsmasq[1006]: read /etc/hosts - 1 addresses
Thu Mar 30 10:57:23 2017 daemon.info dnsmasq[1006]: read /tmp/hosts/dhcp - 1 addresses
Thu Mar 30 10:57:23 2017 daemon.info dnsmasq-dhcp[1006]: read /etc/ethers - 0 addresses
Thu Mar 30 10:57:44 2017 kern.notice kernel: [   49.140000] random: nonblocking pool is initialized
Thu Mar 30 10:58:31 2017 kern.info kernel: [   95.980000] usb 1-1: new high-speed USB device number 2 using ehci-platform
Thu Mar 30 10:58:42 2017 kern.err kernel: [  106.570000] usb 1-1: device not accepting address 2, error -145
Thu Mar 30 10:58:42 2017 kern.info kernel: [  106.690000] usb 1-1: new high-speed USB device number 3 using ehci-platform
Thu Mar 30 10:58:47 2017 kern.info kernel: [  111.580000] usb 1-1: new high-speed USB device number 4 using ehci-platform
Thu Mar 30 10:58:52 2017 kern.err kernel: [  116.700000] usb 1-1: device descriptor read/64, error -145
Thu Mar 30 10:59:07 2017 kern.err kernel: [  131.930000] usb 1-1: device descriptor read/64, error -145
Thu Mar 30 10:59:07 2017 kern.info kernel: [  132.160000] usb 1-1: new high-speed USB device number 5 using ehci-platform
Thu Mar 30 10:59:11 2017 daemon.info hostapd: wlan0: STA 34:14:5f:c4:36:5b IEEE 802.11: authenticated
Thu Mar 30 10:59:11 2017 daemon.info hostapd: wlan0: STA 34:14:5f:c4:36:5b IEEE 802.11: associated (aid 1)
Thu Mar 30 10:59:13 2017 kern.err kernel: [  137.280000] usb 1-1: device descriptor read/64, error -145
Thu Mar 30 10:59:14 2017 daemon.info dnsmasq-dhcp[1006]: DHCPDISCOVER(br-lan) 34:14:5f:c4:36:5b 
Thu Mar 30 10:59:14 2017 daemon.info dnsmasq-dhcp[1006]: DHCPOFFER(br-lan) 192.168.1.207 34:14:5f:c4:36:5b 
Thu Mar 30 10:59:14 2017 daemon.info dnsmasq-dhcp[1006]: DHCPDISCOVER(br-lan) 34:14:5f:c4:36:5b 
Thu Mar 30 10:59:14 2017 daemon.info dnsmasq-dhcp[1006]: DHCPOFFER(br-lan) 192.168.1.207 34:14:5f:c4:36:5b 
Thu Mar 30 10:59:14 2017 daemon.info dnsmasq-dhcp[1006]: DHCPREQUEST(br-lan) 192.168.1.207 34:14:5f:c4:36:5b 
Thu Mar 30 10:59:14 2017 daemon.info dnsmasq-dhcp[1006]: DHCPACK(br-lan) 192.168.1.207 34:14:5f:c4:36:5b Galaxy-Tab-A
Thu Mar 30 10:59:28 2017 kern.err kernel: [  152.510000] usb 1-1: device descriptor read/64, error -145
Thu Mar 30 10:59:28 2017 kern.info kernel: [  152.740000] usb 1-1: new high-speed USB device number 6 using ehci-platform
Thu Mar 30 10:59:38 2017 kern.err kernel: [  163.160000] usb 1-1: device not accepting address 6, error -145
Thu Mar 30 10:59:39 2017 kern.info kernel: [  163.280000] usb 1-1: new high-speed USB device number 7 using ehci-platform
Thu Mar 30 10:59:49 2017 kern.err kernel: [  173.700000] usb 1-1: device not accepting address 7, error -145
Thu Mar 30 10:59:49 2017 kern.err kernel: [  173.700000] usb usb1-port1: unable to enumerate USB device
Thu Mar 30 11:05:21 2017 kern.info kernel: [  505.380000] usb 1-1: new high-speed USB device number 8 using ehci-platform
Thu Mar 30 11:05:26 2017 kern.err kernel: [  510.500000] usb 1-1: device descriptor read/64, error -145
Thu Mar 30 11:05:41 2017 kern.err kernel: [  525.730000] usb 1-1: device descriptor read/64, error -145
Thu Mar 30 11:05:41 2017 kern.info kernel: [  525.960000] usb 1-1: new high-speed USB device number 9 using ehci-platform
Thu Mar 30 11:05:46 2017 kern.err kernel: [  531.080000] usb 1-1: device descriptor read/64, error -145
Thu Mar 30 11:06:02 2017 kern.err kernel: [  546.310000] usb 1-1: device descriptor read/64, error -145
Thu Mar 30 11:06:02 2017 kern.info kernel: [  546.540000] usb 1-1: new high-speed USB device number 10 using ehci-platform
Thu Mar 30 11:06:12 2017 kern.err kernel: [  556.960000] usb 1-1: device not accepting address 10, error -145
Thu Mar 30 11:06:12 2017 kern.info kernel: [  557.080000] usb 1-1: new high-speed USB device number 11 using ehci-platform
Thu Mar 30 11:06:23 2017 kern.err kernel: [  567.500000] usb 1-1: device not accepting address 11, error -145
Thu Mar 30 11:06:23 2017 kern.err kernel: [  567.500000] usb usb1-port1: unable to enumerate USB device
Thu Mar 30 11:20:55 2017 daemon.info hostapd: wlan0: STA 34:14:5f:c4:36:5b IEEE 802.11: authenticated
Thu Mar 30 11:20:55 2017 daemon.info hostapd: wlan0: STA 34:14:5f:c4:36:5b IEEE 802.11: associated (aid 1)
Thu Mar 30 11:20:55 2017 daemon.info dnsmasq-dhcp[1006]: DHCPDISCOVER(br-lan) 34:14:5f:c4:36:5b 
Thu Mar 30 11:20:55 2017 daemon.info dnsmasq-dhcp[1006]: DHCPOFFER(br-lan) 192.168.1.207 34:14:5f:c4:36:5b 
Thu Mar 30 11:20:55 2017 daemon.info dnsmasq-dhcp[1006]: DHCPREQUEST(br-lan) 192.168.1.207 34:14:5f:c4:36:5b 
Thu Mar 30 11:20:55 2017 daemon.info dnsmasq-dhcp[1006]: DHCPACK(br-lan) 192.168.1.207 34:14:5f:c4:36:5b Galaxy-Tab-A
Thu Mar 30 11:21:14 2017 user.info syslog: recv: 57
Thu Mar 30 11:21:14 2017 user.info syslog: Client multicast query DslrDashboardClient{92699ad0-ea1d-415b-a3cc-7e6cbf7be5e1}
Thu Mar 30 11:21:14 2017 user.info syslog: Server message length: 57   msg: DslrDashboardServer{92699ad0-ea1d-415b-a3cc-7e6cbf7be5e1}
Thu Mar 30 11:21:14 2017 user.info syslog: Incoming client connection
Thu Mar 30 11:21:14 2017 user.info syslog: Awaiting client connection
Thu Mar 30 11:21:14 2017 user.info syslog: USB Devices in
Thu Mar 30 11:21:14 2017 user.info syslog: Number of possible configurations: 1 Device Class: 9 VendorID: 7531, ProductID: 2
Thu Mar 30 11:21:14 2017 user.info syslog: Number of alternate settings:
Thu Mar 30 11:21:14 2017 user.info syslog: Interface class: 9 Interface number: 0 Number of endpoints: 1
Thu Mar 30 11:21:14 2017 user.info syslog: Imaging USB devices found: 0
Thu Mar 30 11:21:14 2017 user.err syslog: Error reading total packet size: 0
Thu Mar 30 11:21:14 2017 user.err syslog: Stoping client
Thu Mar 30 11:21:16 2017 user.info syslog: Closing USB device
Thu Mar 30 11:21:20 2017 user.info syslog: recv: 57
Thu Mar 30 11:21:20 2017 user.info syslog: Client multicast query DslrDashboardClient{92699ad0-ea1d-415b-a3cc-7e6cbf7be5e1}
Thu Mar 30 11:21:20 2017 user.info syslog: Server message length: 57   msg: DslrDashboardServer{92699ad0-ea1d-415b-a3cc-7e6cbf7be5e1}
Thu Mar 30 11:21:20 2017 user.info syslog: Incoming client connection
Thu Mar 30 11:21:20 2017 user.info syslog: Awaiting client connection
Thu Mar 30 11:21:20 2017 user.info syslog: USB Devices in
Thu Mar 30 11:21:20 2017 user.info syslog: Number of possible configurations: 1 Device Class: 9 VendorID: 7531, ProductID: 2
Thu Mar 30 11:21:20 2017 user.info syslog: Number of alternate settings:
Thu Mar 30 11:21:20 2017 user.info syslog: Interface class: 9 Interface number: 0 Number of endpoints: 1
Thu Mar 30 11:21:20 2017 user.info syslog: Imaging USB devices found: 0
Thu Mar 30 11:21:20 2017 user.err syslog: Error reading total packet size: 0
Thu Mar 30 11:21:20 2017 user.err syslog: Stoping client
Thu Mar 30 11:21:22 2017 user.info syslog: Closing USB device
Thu Mar 30 11:21:58 2017 user.info syslog: recv: 57
Thu Mar 30 11:21:58 2017 user.info syslog: Client multicast query DslrDashboardClient{92699ad0-ea1d-415b-a3cc-7e6cbf7be5e1}
Thu Mar 30 11:21:58 2017 user.info syslog: Server message length: 57   msg: DslrDashboardServer{92699ad0-ea1d-415b-a3cc-7e6cbf7be5e1}
Thu Mar 30 11:21:58 2017 user.info syslog: Incoming client connection
Thu Mar 30 11:21:58 2017 user.info syslog: Awaiting client connection
Thu Mar 30 11:21:58 2017 user.info syslog: USB Devices in
Thu Mar 30 11:21:58 2017 user.info syslog: Number of possible configurations: 1 Device Class: 9 VendorID: 7531, ProductID: 2
Thu Mar 30 11:21:58 2017 user.info syslog: Number of alternate settings:
Thu Mar 30 11:21:58 2017 user.info syslog: Interface class: 9 Interface number: 0 Number of endpoints: 1
Thu Mar 30 11:21:58 2017 user.info syslog: Imaging USB devices found: 0
Thu Mar 30 11:21:58 2017 user.err syslog: Error reading total packet size: 0
Thu Mar 30 11:21:58 2017 user.err syslog: Stoping client
Thu Mar 30 11:22:00 2017 user.info syslog: Closing USB device
Thu Mar 30 11:22:05 2017 kern.info kernel: [ 1509.910000] usb 1-1: new high-speed USB device number 12 using ehci-platform
Thu Mar 30 11:22:10 2017 kern.err kernel: [ 1515.030000] usb 1-1: device descriptor read/64, error -145
Thu Mar 30 11:22:13 2017 user.info syslog: recv: 57
Thu Mar 30 11:22:13 2017 user.info syslog: Client multicast query DslrDashboardClient{92699ad0-ea1d-415b-a3cc-7e6cbf7be5e1}
Thu Mar 30 11:22:13 2017 user.info syslog: Server message length: 57   msg: DslrDashboardServer{92699ad0-ea1d-415b-a3cc-7e6cbf7be5e1}
Thu Mar 30 11:22:13 2017 user.info syslog: Incoming client connection
Thu Mar 30 11:22:13 2017 user.info syslog: Awaiting client connection
Thu Mar 30 11:22:26 2017 kern.err kernel: [ 1530.260000] usb 1-1: device descriptor read/64, error -145
Thu Mar 30 11:22:26 2017 kern.info kernel: [ 1530.490000] usb 1-1: new high-speed USB device number 13 using ehci-platform
Thu Mar 30 11:22:31 2017 kern.err kernel: [ 1535.610000] usb 1-1: device descriptor read/64, error -145
Thu Mar 30 11:22:46 2017 kern.err kernel: [ 1550.840000] usb 1-1: device descriptor read/64, error -145
Thu Mar 30 11:22:46 2017 kern.info kernel: [ 1551.070000] usb 1-1: new high-speed USB device number 14 using ehci-platform
Thu Mar 30 11:22:57 2017 kern.err kernel: [ 1561.490000] usb 1-1: device not accepting address 14, error -145
Thu Mar 30 11:22:57 2017 kern.info kernel: [ 1561.610000] usb 1-1: new high-speed USB device number 15 using ehci-platform
Thu Mar 30 11:23:07 2017 kern.err kernel: [ 1572.030000] usb 1-1: device not accepting address 15, error -145
Thu Mar 30 11:23:07 2017 kern.err kernel: [ 1572.030000] usb usb1-port1: unable to enumerate USB device
Thu Mar 30 11:23:08 2017 user.info syslog: USB Devices in
Thu Mar 30 11:23:08 2017 user.info syslog: Number of possible configurations: 1 Device Class: 9 VendorID: 7531, ProductID: 2
Thu Mar 30 11:23:08 2017 user.info syslog: Number of alternate settings:
Thu Mar 30 11:23:08 2017 user.info syslog: Interface class: 9 Interface number: 0 Number of endpoints: 1
Thu Mar 30 11:23:08 2017 user.info syslog: Imaging USB devices found: 0
Thu Mar 30 11:23:08 2017 user.err syslog: Error reading total packet size: 0
Thu Mar 30 11:23:08 2017 user.err syslog: Stoping client
Thu Mar 30 11:23:10 2017 user.info syslog: Closing USB device
Top
hubaiz
Site Admin
Posts: 2003
Joined: 27 Jan 2015, 18:58

Re: Can't Connect to DDServer Canon 650D w/Android

Post by hubaiz »

As you can see there are lot of USB errors

Code: Select all

Thu Mar 30 10:58:31 2017 kern.info kernel: [   95.980000] usb 1-1: new high-speed USB device number 2 using ehci-platform
Thu Mar 30 10:58:42 2017 kern.err kernel: [  106.570000] usb 1-1: device not accepting address 2, error -145
Thu Mar 30 10:58:42 2017 kern.info kernel: [  106.690000] usb 1-1: new high-speed USB device number 3 using ehci-platform
Thu Mar 30 10:58:47 2017 kern.info kernel: [  111.580000] usb 1-1: new high-speed USB device number 4 using ehci-platform
Thu Mar 30 10:58:52 2017 kern.err kernel: [  116.700000] usb 1-1: device descriptor read/64, error -145
Thu Mar 30 10:59:07 2017 kern.err kernel: [  131.930000] usb 1-1: device descriptor read/64, error -145
Thu Mar 30 10:59:07 2017 kern.info kernel: [  132.160000] usb 1-1: new high-speed USB device number 5 using ehci-platform
It can mean your router USB port is damaged, the USB cable is bad or eventually your DSLR USB port is damaged.
You can try connect the DSLR with a powered USB hub to the router to see if that helps.
You can also try and connect your DSLR to your PC to see if it is working as expected.
Also be sure if you have the newer MR3040 with a switch that it is in AP position.
Top
Post Reply

Return to “Error reports”