Help runing TP Link TL-MR3040 with my Canon 5DM3

Open discussion about photography, qDslrDashboard
YpsJem
Posts: 7
Joined: 20 Jul 2019, 15:47

Help runing TP Link TL-MR3040 with my Canon 5DM3

Post by YpsJem »

Hello,

may someone can help me to get the TP Link TL-MR3040 running with my Canon 5DM3 ?
How to install "ddserver OpenWrt firmware" ffrom download here and get running?

Thanks for support.
Jem
hubaiz
Site Admin
Posts: 2001
Joined: 27 Jan 2015, 18:58

Re: Help runing TP Link TL-MR3040 with my Canon 5DM3

Post by hubaiz »

Please check the insrructions here: https://dslrdashboard.info/tp-link-mr30 ... wrt-flash/
YpsJem
Posts: 7
Joined: 20 Jul 2019, 15:47

Re: Help runing TP Link TL-MR3040 with my Canon 5DM3

Post by YpsJem »

Thank you. It works.

May you have also an instruction to install the "DDServer OpenWrt" and the "DDServer OpenWrt MR3020 FACTORY" and "DDServer OpenWrt MR3020 SYSUPGRADE" on the TP Link TL MR3020 ?

I still get the "Error 4503" while update the Firmware on web browser.

thx for support
Jem
hubaiz
Site Admin
Posts: 2001
Joined: 27 Jan 2015, 18:58

Re: Help runing TP Link TL-MR3040 with my Canon 5DM3

Post by hubaiz »

For MR3020 V1 and V2 the procedure is same as for the MR3040.
For V3 check this thread: https://dslrdashboard.info/phpBB3/viewt ... 3020#p7935
YpsJem
Posts: 7
Joined: 20 Jul 2019, 15:47

Re: Help runing TP Link TL-MR3040 with my Canon 5DM3

Post by YpsJem »

Thanks, but i got this Error 5403, when i install the same procedure like mr3040.

i tried the firmware factory and sysupdate for mr3020 and i tried firmware for mr3040.
I have the mr3020 2V and still got following message:
Error code: 4503
The uploaded file was not accepted.

thx for support and help
Jem
hubaiz
Site Admin
Posts: 2001
Joined: 27 Jan 2015, 18:58

Re: Help runing TP Link TL-MR3040 with my Canon 5DM3

Post by hubaiz »

The MR3040 images will not work with a MR3020 device.
Are you sure it is a MR3020 V2 and not a V3?
If it is a V2 then the MR3020 image at https://dslrdashboard.info/downloads/
will work.
YpsJem
Posts: 7
Joined: 20 Jul 2019, 15:47

Re: Help runing TP Link TL-MR3040 with my Canon 5DM3

Post by YpsJem »

yes, sure mr3020 v2

firmware update and sysupdate are now completed. I switch power off after every step, so update fits.

But now the cam does not connect via usb kabel and the usb port of the mr3020. I got the mesaage in the app controlmycamera:
DDserver not found, connecting to IP: 192.168.1.1
List connected DSLR at IP: 192.168.1.1

thx for support and help
Jem
hubaiz
Site Admin
Posts: 2001
Joined: 27 Jan 2015, 18:58

Re: Help runing TP Link TL-MR3040 with my Canon 5DM3

Post by hubaiz »

Please check this thread: https://dslrdashboard.info/phpBB3/viewt ... f=5&t=2101
to diagnose ddserver problems.
YpsJem
Posts: 7
Joined: 20 Jul 2019, 15:47

Re: Help runing TP Link TL-MR3040 with my Canon 5DM3

Post by YpsJem »

hubaiz wrote: 24 Jul 2019, 07:37 Please check this thread: https://dslrdashboard.info/phpBB3/viewt ... f=5&t=2101
to diagnose ddserver problems.
Thanks but didn’t found Infos about the ddserver.

I got this info when i put the cam via usb at the mr3020 in the system log:
ID Time Type Level Log Content
1 2016-01-01 01:05:00 3G Information Hotplug: id[0]=04a9_323a, class[0]=storage, action[0]=add

May you can help?

Thanks 4 Support
Jem
hubaiz
Site Admin
Posts: 2001
Joined: 27 Jan 2015, 18:58

Re: Help runing TP Link TL-MR3040 with my Canon 5DM3

Post by hubaiz »

Maybe some screenshots?
Do you have the ddserver package on the System->Software page? (screenshot)?
The system log last 10 lines after you connect and turn on the camera with USB to MR3020?
Post Reply