New IOS version 0.3.3 Crashes will not load ! Blows out !

[sywong2000]

Hi all

I solved my stuck at "Capture in progress" problem. My camera was always set to M with initially setting the exposure as Bulb mode. There must be a tiny bug that when QDD initialize with such setting: the Bulb timer settings windows from the left was not showing and go straight into "Capture In Progress".

To solve the problem, change the exposure time (at lowerleft of QDD screen) to any exposure time except bulb, then take one shot, and switch back to bulb. When clicking the shutter again, the bulb timer windows will show up and no longer stuck and then the shutter would work fine...

Stephen

[Ingo_G]

Hello

my 450D is working fine at the moment. Even when I switch between MF and AF the new version does´t crash. Have to do the time lapse in the next few days. Then I will be able to tell more. Setup CANON EOS450D, iPhone 4S with iOS 9.1 and TP Link MR3040.

Best regards
Ingo

[Anekin007]

I agree. 2.9 was the last good update. File transfer has been broken and doesn't work on iPhone 6 on 8.4, 6s on 9.0.1, and iPad mini on 9.1

[cathy]

Hope the next version of Qdslrdashboard works on the new iPad pro

[hubaiz]

Actually the V0.3.x versions are much stable then the V0.2.9.
V0.2.9 had lot of problems and it was very unstable

[cathy]

With the new iPad version 0.3.2 if I double tap on a picture it blows out .... Forgot to tell you that before
Could you try it on your iPad you have to confirm that ?

You don't have to have it connected to a camera ...just select the pictures tab click on a pic double tap on the picture and the app closes.

[hubaiz]

Works fine on iPad Mini 2.
Double click toggles fullscreen mode in image viewer.
I'm on the latest 9.1 iOS

[cathy]

Ok that good on the iPad Air 2 .

I double tapped a few times and then it crashes iPad 4Th gen 9.1

[Anekin007]

Actually the V0.3.x versions are much stable then the V0.2.9.
V0.2.9 had lot of problems and it was very unstable

Since v3.x updates there seems to be more compaints on this board. These were less post regarding 2.9.

[kuba1987]

Hi,
I am using a Canon EOS 6D with internal Wifi to connect to qdslrdashboard.
The new IOS version 0.3.2 does NOT work either on iPad 3rd. Gen nor on iPhone 5 both running IOS 9.1!!!
After starting dslrdashboard by clicking on the canon icon and trying to start LV both devices instantly crash.
I hope you are going to fix this problem soon!!!!

Regards