dslrdashboard.info

Hi there,

After much ado, I've installed qdslr on my raspberry pi 3. This launches fine from the terminal. However, when I connect a camera or press the USB connection button the application quits without warning. Has anybody else experienced this and can shed some light on the situation? Have also installed qdslr on my mac and connected D810 without issue.

Thanks in advance,


Lewis

Not sure what version do you use but can you try this one: https://drive.google.com/file/d/0BxMZ8X ... sp=sharing

This has fixed it! Thanks so much.

I have a new question along similar lines. Have installed qDslrDashboard and most recently a 3.5inch touchscreen. However, qDslrDashboard always outputs to the HDMI as opposed to the SDI pins on the Pi board, is there a way to force qDslrDashboard to output to SDI?

This is driving me nuts, I'm so close to having this working!

EDIT:

Sorry, I meant the GPIO (I think!), which is what the touchscreen is attached to.

Lgilly wrote:I have a new question along similar lines. Have installed qDslrDashboard and most recently a 3.5inch touchscreen. However, qDslrDashboard always outputs to the HDMI as opposed to the SDI pins on the Pi board, is there a way to force qDslrDashboard to output to SDI?

This is driving me nuts, I'm so close to having this working!