DDSERVER OpenWrt package for HooToo HT-TM04
Posted: 07 Jul 2015, 14:58
Hello and thanks for your great work!
Recently I've got a HooToo HT-TM04, great for travel (6000 mAh battery, 8 MB Flash, 32 MB RAM).
After installing and updating OpenWRT, I added all the functions needed: luci, samba, 3G modem etc.
I'm now on openwrt-ramips-rt305x-ht-tm02-squashfs-factory-r42649, it's in the trunk, http://wiki.openwrt.org/toh/hootoo/tripmate-nano
Because I'm noob in linux, I've used a lot of tutorials and info for that. All is working fine.
But now I'm stuck. I want to add ddserver to my router.
Using offline install method with DDServer OpenWrt ar71xx V0.2-13 package, ipk file, I receive an error message about wrong platform.
AFAIK the file I tried to install is for ar71xx platform, and my router is openwrt-ramips-rt305x platform.
I understand following my poor knowledge that I need another ipk file, specific to my hardware.
My router HT-TM04 have a similar hardware to Hame MPR-A2:
SoC: RT5350f (360MHz)
Flash: 8 MB
RAM: 32 MB
Also the HooToo TM01 and TM02 seem to have the same hardware. It would be a nice addition to the range of routers supported by ddserver.
Could you guide me further to install ddserver on my router ?
Thanks in advance for your time!
Recently I've got a HooToo HT-TM04, great for travel (6000 mAh battery, 8 MB Flash, 32 MB RAM).
After installing and updating OpenWRT, I added all the functions needed: luci, samba, 3G modem etc.
I'm now on openwrt-ramips-rt305x-ht-tm02-squashfs-factory-r42649, it's in the trunk, http://wiki.openwrt.org/toh/hootoo/tripmate-nano
Because I'm noob in linux, I've used a lot of tutorials and info for that. All is working fine.
But now I'm stuck. I want to add ddserver to my router.
Using offline install method with DDServer OpenWrt ar71xx V0.2-13 package, ipk file, I receive an error message about wrong platform.
AFAIK the file I tried to install is for ar71xx platform, and my router is openwrt-ramips-rt305x platform.
I understand following my poor knowledge that I need another ipk file, specific to my hardware.
My router HT-TM04 have a similar hardware to Hame MPR-A2:
SoC: RT5350f (360MHz)
Flash: 8 MB
RAM: 32 MB
Also the HooToo TM01 and TM02 seem to have the same hardware. It would be a nice addition to the range of routers supported by ddserver.
Could you guide me further to install ddserver on my router ?
Thanks in advance for your time!