Search found 8 matches
- 30 Aug 2023, 17:32
- Forum: Open discussion
- Topic: counter for remaining images on chip in camera not updating
- Replies: 0
- Views: 76862
counter for remaining images on chip in camera not updating
While connected to the camera, at the bottom right corner is a counter (for remaining images?). This counter shows the capacity of the chip aka the number of images available . But the value does not decrease as expected while taking shots. The value remains the same (unchanged) until the chip is fu...
- 11 Mar 2020, 00:27
- Forum: Open discussion
- Topic: Routers with OpenWrt pre-installed
- Replies: 0
- Views: 4139
Routers with OpenWrt pre-installed
Is there a listing of portable routers running qDD properly without flashing the device (like TP-Link MR3040 or WR902AC AC750). The routers from GL.iNet come with OpenWrt pre-installed (among many other features) https://www.gl-inet.com/products/ Will they run qDD properly? Who has first hand experi...
- 11 Mar 2020, 00:14
- Forum: Error reports
- Topic: activating LifeView, exposure jumps to 1/30
- Replies: 3
- Views: 5333
Re: activating LifeView, exposure jumps to 1/30
Thanks for reply.
The LV switch is set to Photo/Camera properly.
When entering LV longest exposure remains to be 1/30 sec.
Exposure Mode is set to M manual.
When in Single shot mode the shutter speed can be adjusted as expected.
So it's still the same, unchanged.
Any other ideas?
The LV switch is set to Photo/Camera properly.
When entering LV longest exposure remains to be 1/30 sec.
Exposure Mode is set to M manual.
When in Single shot mode the shutter speed can be adjusted as expected.
So it's still the same, unchanged.
Any other ideas?
- 07 Mar 2020, 14:44
- Forum: Error reports
- Topic: activating LifeView, exposure jumps to 1/30
- Replies: 3
- Views: 5333
activating LifeView, exposure jumps to 1/30
Hello, Status: Nikon D5 connection to qDD successful and stable. Problem: When activating LifeView the value for exposure jumps to 1/30 sec regardless of what the camera was set to before. The exposure value cannot be set to longer than 1/30 sec . However the exposure value can be set to any given v...
- 03 Mar 2020, 02:44
- Forum: Error reports
- Topic: Forum Search for Nikon D5
- Replies: 3
- Views: 3767
Re: Forum Search for Nikon D5
Thanks, now the 2-letter-word search works just fine.
- 02 Mar 2020, 18:28
- Forum: Error reports
- Topic: Forum Search for Nikon D5
- Replies: 3
- Views: 3767
Forum Search for Nikon D5
Hello, my Nikon D5 keeps disconnecting from qDSLRdashboard. For the few times it does NOT disconnect,in LifeView the value for exposure is jumps to 1/30 regardless of what the camera was set to before. So I tried to search in the forum. The search result for "Nikon D5" is as follows: The f...
- 28 Jul 2016, 01:35
- Forum: Open discussion
- Topic: Raspberry Pi 7" touch display
- Replies: 0
- Views: 2617
Raspberry Pi 7" touch display
Hi all, will qDslrDashBoard run fine when using the official Raspberry Pi 7" touch display https://www.raspberrypi.org/products/raspberry-pi-touch-display/ ...that is connected to a Raspberry Pi 2 Model B and/or Raspberry Pi 3 . Has anybody put this to work already? If so, what is your experien...
- 26 Jul 2016, 13:42
- Forum: Error reports
- Topic: Install qDslrDashboard on a Raspberry Pi 2 Model B
- Replies: 0
- Views: 2587
Install qDslrDashboard on a Raspberry Pi 2 Model B
Hi all, I am in the process of installing qDslrDashboard on a Raspberry Pi 2 Model B. I carefully followed the descriptions by SdP http://dslrdashboard.info/phpBB3/viewtopic.php?f=5&t=1433&start=20#p4267 and also http://dslrdashboard.info/phpBB3/viewtopic.php?f=5&t=1480#p3970 . At Sartup...