Search found 2001 matches

by hubaiz
11 Mar 2015, 08:27
Forum: Open discussion
Topic: Newbie Nikon D7100
Replies: 4
Views: 7509

Re: Newbie Nikon D7100

I presume you use the old Android only DslrDashboard that I don't maintain anymore.
The new application is called qDslrDashboard and is cross platform and can be downloaded from the same link.
by hubaiz
11 Mar 2015, 08:24
Forum: Error reports
Topic: Raspberry Pi - DDServer - No Dslr Device Found
Replies: 12
Views: 20159

Re: Raspberry Pi - DDServer - No Dslr Device Found

You should prevent the OS from mounting the camera SD card.
Yes it allows multiple clients but at same time only one client could be connect to one camera.
by hubaiz
11 Mar 2015, 08:22
Forum: Open discussion
Topic: Connecting to Sony NEX 6
Replies: 3
Views: 7398

Re: Connecting to Sony NEX 6

For Sony cameras only the camera built in wireless connection will work.
You pair your device wireless with the camera wireless.
Start qDD and press the 'Sony wireless' button.

Sony camera will not work with the TP-Link router.
by hubaiz
10 Mar 2015, 20:05
Forum: Error reports
Topic: Raspberry Pi - DDServer - No Dslr Device Found
Replies: 12
Views: 20159

Re: Raspberry Pi - DDServer - No Dslr Device Found

Does the OS maybe mount the camera SD card?
by hubaiz
10 Mar 2015, 18:14
Forum: Error reports
Topic: Raspberry Pi - DDServer - No Dslr Device Found
Replies: 12
Views: 20159

Re: Raspberry Pi - DDServer - No Dslr Device Found

Please note that there in the description there are steps for building ddserver for the OpenWrt platform and separate for building it for Linux (including the RPI) The simple steps are: git clone https://github.com/hubaiz/DslrDashboardServer.git cd DslrDashboardServer sudo apt-get install build-esse...
by hubaiz
10 Mar 2015, 16:53
Forum: Error reports
Topic: Problems with new IOS verson 0.2.5 on Iphone
Replies: 3
Views: 5669

Re: Problems with new IOS verson 0.2.5 on Iphone

-Crashes/hangs after a few minutes of usage - cannot re-connect after crash without restarting QDslrdashboard and sometimes the camera I worked a lot on the iOS version in the past days/weeks so hope the next version will be more stable for you. - Buttons become inactive after a while and then QDD ...
by hubaiz
10 Mar 2015, 15:35
Forum: Error reports
Topic: qDDB not connecting
Replies: 9
Views: 11172

Re: qDDB not connecting

What interval did you use and what was the slowest shutter speed?
Did you use the qDD interval timer or an external one?
by hubaiz
10 Mar 2015, 15:31
Forum: Open discussion
Topic: Transferring only JPEG's on MacBoook
Replies: 1
Views: 4480

Re: Transferring only JPEG's on MacBoook

If image review is enabled and the image format RAW+JPG only the JPG file is downloaded.
If the interval timer is active the JPG preview is not downloaded but if you set the capture destination to local then both files will be downloaded, I can't change that.
by hubaiz
10 Mar 2015, 08:26
Forum: Error reports
Topic: Interval Timer behavior (or misbehavior)
Replies: 3
Views: 6160

Re: Interval Timer behavior (or misbehavior)

Yes I noted this in the manual
The camera needs some time after it finished the capture that depends on camera model and used SD card (speed).
Usually it is around 3-4 second.
qDD will send the capture command at the defined interval but if the camera is not ready it will not accept it.
by hubaiz
10 Mar 2015, 06:14
Forum: Open discussion
Topic: Multiple Cameras not showing up
Replies: 13
Views: 20232

Re: Multiple Cameras not showing up

Just for record I tested this again and device discovery works for the client router to, no long press required.
For the AP router it does not work but it is because my AP router is setup in a different way.