dslrdashboard.info

Ah, and does the camera react when you press the capture button while in live view?
Does it maybe stop the live view? Does it start the capture?

Do you capture to local device (capture button is red) or to camera SD card (capture button is white)?
Is the AF button white or red?

Please use qDslrDashboard from here: http://dslrdashboard.info/downloads/

I'm not maintaining the old Android only DslrDashboard that is available in Play store.

After you connect your laptop wireless to MR3040 wireless open your web browser and navigate to OpenWrt web interface at http://192.168.1.1 Go to Administration Under System->Software check the ddserver package, it should be V0.2-13 Connect your camera with USB and turn it on Then in OpenWrt web int...

Like this:

Connect he DSLR with USB to the MR3040 and turn it on
Pair your iOS device wireless with the MR3040 wireless
Start qDD and press the 'Network' button, it should find the connected camera
If that does not work long press the 'Network' button and enter 192.168.1.1 as IP and press the 'Connect' button.

Page 16 and 33
You must enable live view.

lars wrote:my tab 4 is android 4.4.2, my tab 2 is android 4.2.2 my dell venue 8 is android 4.3 and my nexus 7 is android 4.3

hope this helps Thanks Lars

I think the problem is not with Android version but with the CPU

Did qDD crash with all intervals (30 sec, 15 sec, 5 sec) ?
Do you see a pattern?

You should upgrade the MR3040 firmware by following this guide: http://dslrdashboard.info/tp-link-mr304 ... e-upgrade/
using the sysupgrade image for V2 from here: http://dslrdashboard.info/downloads/