dslrdashboard.info

jvclarke wrote:Thanks for attempting to answer this - I only wish that Zoltan would describe how he set this up - but so far I have not heard anything.

Not sure what you mean, I posted the steps here:

https://drive.google.com/file/d/0BxMZ8X ... sp=sharing

There is a bug that will be fixed with the next version. You can overcome it by entering LRT with JPG image format and when in LRT you change it to RAW+JPG with the camera display.

It should work with MR3040.
The advantage using MR3040 is that it will work with other DSLR to, so if you later change your D3200 to other Nikon/Canon DSLR it will work.
I also thing that the MR3040 is faster then the WU-1a and has a stronger wireless signal.

Please check the manual I wrote there about focus stacking: http://dslrdashboard.info/downloads/

Sorry you couldn't figure out. I'm not a network administrator but I did a simple Google search https://www.google.com/search?%7Bgoogle:acceptedSuggestion%7Doq=cats&sourceid=chrome&ie=UTF-8&q=openwrt+client+mode Clicked the first link : http://wiki.openwrt.org/doc/howto/clientmode After ...

The compiler can't find the files. You are executing it in the wrong folder. git clone https://github.com/hubaiz/DslrDashboardServer.git sudo apt-get install build-essential pkg-config libusb-1.0-0-dev cd DslrDashboardServer g++ -Wall src/main.cpp src/communicator.cpp `pkg-config --libs --cflags lib...

I was talking about running qDslrDashboard on RPI2 (it needs a build for ARM) You are talking about compiling/running DslrDashboardServer on RPI To compile and run DslrDashboardServer on RPI git clone https://github.com/hubaiz/DslrDashboardServer.git sudo apt-get install build-essential pkg-config l...

From you iPad browser can you access the OpenWrt web interface (http://192.168.1.1) ? If yes connect your 7d to MR3040 and turn it on and under Status->System log check if you have something like this: Mar 4 06:55:43 Arduino kern.info kernel: [2409513.330000] usb 1-1.1.4.3: new high-speed USB device...

Ok, will check
The first button is 'Reset' that will restore the scaling factor.
On Android you can restore by going into Settings->Apps then find qDslrDashboard and press the 'Clear data' button

Will check, but there is only a command to start the capture and the camera will do it according the current settings.