QdslrDashboard crashes

qDslrDashbord error reports
Post Reply
leonardimages
Posts: 1
Joined: 27 Mar 2015, 06:35

QdslrDashboard crashes

Post by leonardimages »

Hi everyone,
I am a new user to Qslrdashboard, I have successfully flashed TP-Link MR3040, set up the wireless network. I am running Win 8.1 on a Laptop and can launch DSLRDashboard and connect (wi-fi) to Tp-Link Ok, but when I attempt to connect to my Canon 7D, the software crashes every time. Tried reinstalling everything but with no change.
Any suggestion?
Cheers
hubaiz
Site Admin
Posts: 2001
Joined: 27 Jan 2015, 18:58

Re: QdslrDashboard crashes

Post by hubaiz »

After you connect your laptop wireless to MR3040 wireless open your web browser and navigate to OpenWrt web interface at http://192.168.1.1
Go to Administration
Under System->Software check the ddserver package, it should be V0.2-13

Connect your camera with USB and turn it on
Then in OpenWrt web interface check Status->System log
you should get something like this

Code: Select all

Mar 27 07:50:30 Arduino kern.info kernel: [4400000.970000] usb 1-1.1.4.3: new high-speed USB device number 116 using ehci-platform
Mar 27 07:50:30 Arduino kern.info kernel: [4400001.210000] usb 1-1.1.4.3: New USB device found, idVendor=04a9, idProduct=323b
Mar 27 07:50:30 Arduino kern.info kernel: [4400001.210000] usb 1-1.1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Mar 27 07:50:30 Arduino kern.info kernel: [4400001.210000] usb 1-1.1.4.3: Product: Canon Digital Camera
Mar 27 07:50:30 Arduino kern.info kernel: [4400001.220000] usb 1-1.1.4.3: Manufacturer: Canon Inc.
Do you have this?
Post Reply