v3.5.1 on OSX won't connect to D5100

qDslrDashbord error reports
Post Reply
dansplain
Posts: 1
Joined: 17 May 2016, 05:20

v3.5.1 on OSX won't connect to D5100

Post by dansplain »

Hello - I have installed qdslrdashboard for the first time on a Macbook Pro running El Capitan (tried on a Mac running Yosemite as well). I am unable to connect via usb or using the tplink MR3040 to a Nikon D5100. Any suggestions? I am connecting the Nikon D5100 with USB, turning the camera on and then pressing the USB connect button in qdslrdashboard. And nothing happens after the press. Any help would be appreciated. Thanks.
hubaiz
Site Admin
Posts: 2001
Joined: 27 Jan 2015, 18:58

Re: v3.5.1 on OSX won't connect to D5100

Post by hubaiz »

Please check this topic regarding USB on El Capitan: http://dslrdashboard.info/phpBB3/viewto ... ?f=5&t=643

Is your Mac connected only to the MR3040 or to other network to?
There could be an IP conflict. The MR3040 has the 192.168.1.1 IP address by default as most of home routers.
Ingo_G
Posts: 9
Joined: 09 Nov 2015, 19:56

Re: v3.5.1 on OSX won't connect to D5100

Post by Ingo_G »

Hello

is there anybody here in the forum who has successfully connected an Nikon camera to the Mac, using USB? Any ideas are welcome. The linked notice from hubaiz won´t work. (Mac Pro 10.11.5)

Thank you very much

Ingo
Post Reply