Connecting iPad to Nikon D800: port#?

qDslrDashbord error reports
Post Reply
mmckeag
Posts: 8
Joined: 14 Nov 2015, 06:27
Location: Oregon, USA

Connecting iPad to Nikon D800: port#?

Post by mmckeag »

I successfully installed and configured OpenWRT on a new MR3040, now trying to connect to D800 from iPad. WiFi connection established between MR3040 and iPad, then lauch qDD and try to connect to Nikon. Nikon IP address window pops up asking for IP address and Port number. By default the IP address displayed is 192.168.1.1 and port number by default is 15740. Pressing OK does not result in connection to the camera. The IP address is correct, but port number? I checked the video tutorial, port number entry is not mentioned. Any suggestions?
mmckeag
Posts: 8
Joined: 14 Nov 2015, 06:27
Location: Oregon, USA

Re: Connecting iPad to Nikon D800: port#?

Post by mmckeag »

Uh, never mind. I figured it out. I was supposed to press the Network button not the Nikon button to connect. Until today I have been using qDD only with the D750, connecting through its internal WiFi. Since discovering my error I've connected to the D800 from iPhone, iPad, and about to try connecting from the MacBook.
Post Reply