There is no chance to connect

[Bildberauscht]

Hi everybody,
The basics:
Cameras I have tried: Nikon D300s, Nikon D810, Canon 5D Mark2
Phone is an Panasonic DMC-CM 1 with Android 5.0.2
qDLSR Dashboard 3.5.3
TP-Link 3040 in Factory V2 Version
A year or more ago I have already work with the hole system (but another phone and an older App-Version) and it worked fine, I could contact the Nikons with TP-Link and use every feature the APP offers (great!!!). But now nothing works. I have tried every combination of the Cameras above with TP-link and phone. They never connect. First I thought there is a problem around the WLAN-connection, there are so many possible mistakes, but even a connection with the help of an USB-Cable does not work with any of these cameras. So I got no idea what I can do, even how to start the search for the problem. Heeelp, please!

[hubaiz]

Please check this thread regarding ddserver problems: viewtopic.php?f=5&t=2101

For a direct USB connection with your Android device you need to use an USB OTG adapter and your Android device must have the USB host function.

[Bea]

I have the Same Problem with a Canon 5D Mark II. After the First configuration It worked. But since a while it doesn't want to connect to my canon.
I have checked the threat you suggested but I am not able to understand why is not working ... I'm desperate . Can you help?

IMG_7106.PNG (114.93 KiB) Viewed 9595 times

IMG_7106.PNG (114.93 KiB) Viewed 9595 times

[hubaiz]

Do you use the USB cable that you get with your DSLR?
Is it connected to the MR3040 full size USB port?
If you checked the thread I suggested then please post your OpenWrt 'System log'.

[Bildberauscht]

Hi hubaiz,
thanks for your help. I have tried the procedere in viewtopic.php?f=5&t=2101
but there are some points. First, when I connect the nikon with the MR3040 the WLAN flashes. Does this mean something?
Then I followed the way till I connect my advice with the MR3040 and entered the 192...code there opens the OpenWrt-side
with the title flashoperations. I just have the options flash firmware and reboot. There is no chance to navigate to system.
Any idea???
Thanks for your support!

[hubaiz]

Maybe a screenshot?

[Bildberauscht]

Sorry!
How do I upload a screenshot?

[hubaiz]

Use the 'Attachments' tab or drag & drop the image in the edit box

[Bildberauscht]

I have tried both ways before, but I never see the screenshot.
Now I attached it and there ist the green button in the right, so maybe it is attached now
and I just can´t see it? Sorry for being so complicated.

[Bildberauscht]

It work
So this is what I see at my device (Panasonic phone) when I connect the Nikon (D810) with my MR3040 and open the
browser on my Device and print in the 192.... so I got the problem, that I can´t enter to the system???