LRTimelapse in qDslrDashboard

qDslrDashbord error reports
Post Reply
garfield72
Posts: 8
Joined: 15 Feb 2019, 18:27

LRTimelapse in qDslrDashboard

Post by garfield72 »

Hello, I tried a holy grail sunset and had a problem when ltimelapse could not decreases speed.
my initial settings were: 1/100s, f16 and 100 iso. In Lrtimelapse, I had set f3.5 mini, 2s maxi et 800 iso maxi.
When Lrtimelapse arrived at 2s, he changed aperture to f4 and the iso to 400.
Which give the image lighter.
I tried to change the value in Lrtimelapse and click on the "-"button and the aperture and iso parameters does not change.
I attach screenshots
Someone can help me

Thanks
Attachments
LRT.jpg
LRT.jpg (121.17 KiB) Viewed 4047 times
Screenshot_20190215-180135.jpg
Screenshot_20190215-180135.jpg (143.72 KiB) Viewed 4047 times
hubaiz
Site Admin
Posts: 2001
Joined: 27 Jan 2015, 18:58

Re: LRTimelapse in qDslrDashboard

Post by hubaiz »

What camera did you use?
The values in qDD should match the values displayed in camera.
garfield72
Posts: 8
Joined: 15 Feb 2019, 18:27

Re: LRTimelapse in qDslrDashboard

Post by garfield72 »

I use a Canon 100D. I tried this morning and I realized that if I set my camera to f16, then I connect my smartphone and lauch qDlsrdasbord, it does not display the correct aperture value (see attachment). If I change the aperture on the camera, qDlsrdashboard gets updated. Is this normal? Whenever I can, I will do it again a holy grail.
Attachments
Caméra.jpg
Caméra.jpg (133.65 KiB) Viewed 4040 times
hubaiz
Site Admin
Posts: 2001
Joined: 27 Jan 2015, 18:58

Re: LRTimelapse in qDslrDashboard

Post by hubaiz »

What lens do you use?
Can you contact me with the support email?
garfield72
Posts: 8
Joined: 15 Feb 2019, 18:27

Re: LRTimelapse in qDslrDashboard

Post by garfield72 »

I just sent an email
Post Reply