Manual GPS entry not working
Posted: 29 Mar 2019, 19:02
GPS does not work at all, i.e. when positioning ON it does not get a position.
And sincev ersion 3.5.8 there is a manual entry, but when I filled in my coordinates (28S, 153E, north NSW) it gives 51.52N, 0.13W, whatever I fill in.
The format it should be filled in, is not given, so I guessed hh.mm, hh (as integers), but nothing worked and no error appeared.
I filled in the values in a small edit box. The Large blank white field below it does mot accept input.
The top part of the image shows the input field and the result is shown below it.

And sincev ersion 3.5.8 there is a manual entry, but when I filled in my coordinates (28S, 153E, north NSW) it gives 51.52N, 0.13W, whatever I fill in.
The format it should be filled in, is not given, so I guessed hh.mm, hh (as integers), but nothing worked and no error appeared.
I filled in the values in a small edit box. The Large blank white field below it does mot accept input.
The top part of the image shows the input field and the result is shown below it.
