ILC-A68

qDslrDashbord error reports
Post Reply
Sengoku
Posts: 2
Joined: 10 May 2019, 07:27

ILC-A68

Post by Sengoku » 10 May 2019, 07:39

Hello, I have a problem.
I’ve tried to connect qdd to my a68, but no results. Downloaded winusb driver, step-by-step installation. With this my Imaging Edge doesn’t recognise camera, but qdd does( if driver is not installed, then qdd stays on searchin...).
But even if installed and connected, the only step I see is Searching...
Connecting to DSLR ilc-a68

And nothing more. I’m trying to connect via usb, because a68 doesn’t have wifi module. After installation, in device mgr creates another „USB device” branch, with ilc-a68( not where all USB devices are listed). In driver details I see three drivers( one stored in sys32/drivers/winusb.sys. Second is the replaced driver from link, and third is something from windows as well.

Any ideas?

hubaiz
Site Admin
Posts: 1607
Joined: 27 Jan 2015, 18:58

Re: ILC-A68

Post by hubaiz » 10 May 2019, 09:05

Only the Sony mirrorless models are supported with the built in wireless and using the 'Smart remote control' camera application.
Sony cameras will not work with USB connection with qDslrDashboard.

Sengoku
Posts: 2
Joined: 10 May 2019, 07:27

Re: ILC-A68

Post by Sengoku » 10 May 2019, 09:39

Ok. Thank you. Another thing for moving on to E mount. I was afraid of my lenses, but now I know that they can be attached through adapter.

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests