Nikon Z6: aperture / time /ISO

qDslrDashbord error reports
Post Reply
nordi
Posts: 10
Joined: 06 Feb 2020, 09:15

Nikon Z6: aperture / time /ISO

Post by nordi »

Nikon Z6 has three user definitions, where you can save different parameters. In U1 I have saved manual exposure, the aperture, time and ISO and other parameters. Then I adapt the aperture, time and ISO to my motive. Then I connect Z6 with WLAN to qdslrdashbaord and the app read the values from the saved parameters in U1, not the adapted one and save this to my camera!

I correct aperture, time and ISO via qdslrdashboard. Then I click on LiveView and the values are the same as before, the save value in U1!!!
hensil
Posts: 14
Joined: 26 Feb 2018, 04:35

Re: Nikon Z6: aperture / time /ISO

Post by hensil »

To my knowledge, qDSLRDashboard does not support users settings.
Please use your camera in manual exposore mode only.
Post Reply