Page 1 of 1

Did I just make my MR3040 a brick?

Posted: 09 Sep 2021, 23:28
by 53helofe
Ok, so I went to openwrt and installed the openwrt-15.05-ar71xx-generic-tl-mr3040-v2-squashfs-factory.bin then installed the DDServer OpenWrt MR3040 V2 Sysupgrade from here.
Now the unit has no wifi, only the on light is illuminated and the wifi light, nor any other aside the on light, illuminate.

So did I just turn this thing into a brick or is there some hope that I may be able to get it to function?
Honestly the instructions on this site are not so step by step and assume way too much in the way of individual knowledge so maybe I did something wrong.
Any help would be appreciated.

Thanks,
Jason