Brackets taking duplicate EV's?
-
- Posts: 2
- Joined: 18 Apr 2015, 21:58
Brackets taking duplicate EV's?
I've been using DSLRdashboard to shoot 5 shot brackets and recently I've gotten a lot of brackets that skip an exposure value and duplicate another. I was shooting in aperture priority, so is this from the camera changing it's metering mid bracket? Would shooting full manual prevent this? Is something else causing it? Thanks
Re: Brackets taking duplicate EV's?
Your camera model?
Settings used (aperture, number of over/under exposure, ev step) ?
Settings used (aperture, number of over/under exposure, ev step) ?
Re: Brackets taking duplicate EV's?
Same problem here with both Canon 50D and Canon 7D. Tried various combinations of aperture, number of under/over exposure values and ev steps. Results in camera have always been the correct number of total steps but the aperture values and ev steps have been wrong.
Thanks!!!
Tom
Thanks!!!
Tom
Re: Brackets taking duplicate EV's?
1. What camera exposure modetmaugham wrote:Same problem here with both Canon 50D and Canon 7D. Tried various combinations of aperture, number of under/over exposure values and ev steps. Results in camera have always been the correct number of total steps but the aperture values and ev steps have been wrong.
Thanks!!!
Tom
2. what BKT mode (in camera, or qDD)
Re: Brackets taking duplicate EV's?
Exposure mode was either AV or Manual (tested several times). Bracketing was in qdd.
Thanks,
Tom
Thanks,
Tom
Re: Brackets taking duplicate EV's?
should be fixed in V0.3 beta
This is the last one: https://drive.google.com/file/d/0BxMZ8X ... sp=sharing
This is the last one: https://drive.google.com/file/d/0BxMZ8X ... sp=sharing