Hallo Leute,
ich hoffe hier stark auf Eure Hilfe, da ich in Sachen TP-Link MR 3040 Laie bin.
Habe vor einiger Zeit ein MR 3040-V1 mit der initalen Instalation umgerüstet
und das funktionierte auch einige Zeit gut. Jetzt wollte ich mit der Datei DD
Server OpenWrt MR 3040 V1 Sysupgrade ein Update durchführen doch danach
funktionierte leider nichts mehr. Unter W-LAN bekomme ich jetzt DD Server AP
angezeigt??? Wenn ich auf den Router MR 3040 gehe bekomme ich ganz andere
Menüs wie vorher.Bekomme jetzt auf meinem Android Tablet nur noch die
Kamera Firma angezeigt nämlich Canon Inc.-Canon Digital Kamera und habe
kein übertragenes Bild mehr.
Nämlich folgendermaßen.
Status
System
Router Name OpenWrt
Router Model TP-Link TL-MR3040 v1
Firmware Version OpenWrt Attitude Adjustment 12.09.1 / LuCI 0.11 Branch (0.11+svn9951)
Kernel Version 3.3.8
Local Time Thu Sep 8 15:45:48 2011
Uptime 0h 1m 57s
Load Average 0.26, 0.15, 0.06
Memory
Total Available
17740 kB / 29324 kB (60%)
Free
6416 kB / 29324 kB (21%)
Cached
8772 kB / 29324 kB (29%)
Buffered
2552 kB / 29324 kB (8%)
Network
IPv4 WAN Status
br-lan Type: static
Address: 192.168.1.1
Netmask: 255.255.255.0
Gateway: 192.168.1.1
Connected: 0h 1m 41s
Active Connections
249 / 16384 (1%)
DHCP Leases
Hostname IPv4-Address MAC-Address Leasetime remaining
Det-PC 192.168.1.100 70:1a:04:e2:e4:1c 11h 59m 11s
Wireless
Generic 802.11bgn Wireless Controller (radio0)
[Signal: -43 dBm / Noise: -95 dBm]
95% SSID: DDServerAP
Mode: Master
Channel: 11 (2.462 GHz)
Bitrate: 65 Mbit/s
BSSID: A0:F3:C1:39:6F:92
Encryption: None
Associated Stations
MAC-Address Network Signal Noise RX Rate TX Rate
[Signal: -43 dBm / Noise: -95 dBm] 70:1A:04:E2:E4:1C Master "DDServerAP" -43 dBm -95 dBm 58.5 Mbit/s, MCS 6, 20MHz 65.0 Mbit/s, MCS 7, 20MHz
Powered by LuCI 0.11 Branch (0.11+svn9951) OpenWrt Attitude Adjustment 12.
Flash operations
Actions
Configuration
Backup / Restore
Click "Generate archive" to download a tar archive of the current configuration files. To reset the firmware to its initial state, click "Perform reset" (only possible with squashfs images).
Download backup:
Reset to defaults:
To restore configuration files, you can upload a previously generated backup archive here.
Restore backup:
Flash new firmware image
Upload a sysupgrade-compatible image here to replace the running firmware. Check "Keep settings" to retain the current configuration (requires an OpenWrt compatible firmware image).
Keep settings:
Image:
Powered by LuCI 0.11 Branch (0.11+svn9951) OpenWrt Attitude Adjustment 12.09.1
radio0: Master "DDServerAP"
Wireless Overview
Generic MAC80211 802.11bgn (radio0)
Channel: 11 (2.462 GHz) | Bitrate: 58.5 Mbit/s
[Signal: -40 dBm / Noise: -95 dBm]
100% SSID: DDServerAP | Mode: Master
BSSID: A0:F3:C1:39:6F:92 | Encryption: None
Associated Stations
SSID MAC-Address IPv4-Address Signal Noise RX Rate TX Rate
[Signal: -40 dBm / Noise: -95 dBm] DDServerAP 70:1A:04:E2:E4:1C 192.168.1.100 -40 dBm -95 dBm 58.5 Mbit/s, MCS 6, 20MHz 58.5 Mbit/s, MCS 6, 20MHz
Powered by LuCI 0.11 Branch (0.11+svn9951) OpenWrt Attitude Adjustment 12.09.1
Nichts geht mehr
Re: Nichts geht mehr
The router works and I presume you have the latest firmware on it ( hope you downloaded the file from here: http://dslrdashboard.info/downloads/ )
You must use qDslrDashboard with it that you can also downloaded from the same link: http://dslrdashboard.info/downloads/
On what platform do you use it ?
You must use qDslrDashboard with it that you can also downloaded from the same link: http://dslrdashboard.info/downloads/
On what platform do you use it ?