Running qDslrDashboard on Raspbian Stretch

Open discussion about photography, qDslrDashboard
Post Reply
hubaiz
Site Admin
Posts: 1392
Joined: 27 Jan 2015, 18:58

Running qDslrDashboard on Raspbian Stretch

Post by hubaiz » 22 Feb 2018, 08:26

Using the Raspbian stretch image available here https://www.raspberrypi.org/downloads/raspbian/
(Release date:2017-11-29)

Code: Select all

sudo raspi-config
set the memory split to 256 in 'Advanced options->Memory Split'

restart

Code: Select all

sudo reboot
update

Code: Select all

sudo apt-get update
sudo apt-get dist-upgrade
update the system

Code: Select all

sudo rpi-update
download the qDslrDashboard V3.5.5 Stretch image and unpack

Code: Select all

tar -xzvf ~/Downloads/qDslrDashboard_V3.5.5_RPI_Stretch.tar.gz
cd qDslrDashboard_V3.5.5_RPI_Stretch/
install the missing libraries

Code: Select all

sudo apt-get install libjpeg8 libts-0.0-0
run qDslrDashboard with

Code: Select all

./qDslrDashboard.sh

lefey
Posts: 3
Joined: 05 Jul 2015, 01:33

Re: Running qDslrDashboard on Raspbian Stretch

Post by lefey » 27 May 2018, 13:46

Hi hubaiz!
Thank you for your work!
I have a raspberry model pi 2 b, and completely follow your instruction, but it does not work :(
When I try to start qDslrDashboard.sh, the process qDslrDashboard is immediately stop.
I am try to install raspbian stretch latest release and exact 2017-11-29 release, but nothing help.
If i remove log output to dev/null in the qDslrDashboard.sh and try to run again, its only say "Illegal instruction".
What i am doing wrong?

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests