Nikon D5200 and LiveView for several displays

Open discussion about photography, qDslrDashboard
Post Reply
lyrri
Posts: 2
Joined: 02 Mar 2019, 13:04

Nikon D5200 and LiveView for several displays

Post by lyrri »

Hello,

I tried to connect my D5200 with last one qDslrDashboard. It works fine.
Right now I need to show LiveView on both displays - camera's viewfinder and PC monitor. When I start qDslrDashboard LiveView mode, my camera disables lcd display. Could you say is it possible to show live view on both displays at the same time? At least in general is itpossible?
Also I checked HDMI output and analog output (I used analog to usb video converter). Both work properly and show liveview at the same time with viewfinder.

Best regards,
lyrri
hubaiz
Site Admin
Posts: 2001
Joined: 27 Jan 2015, 18:58

Re: Nikon D5200 and LiveView for several displays

Post by hubaiz »

Hi unfortunately it is not possible.
Nikon cameras will disable the camera screen when the remote live view is activated.
Only with the new Z cameras is possible to have the live view displayed in qDD and on the camera screen.
lyrri
Posts: 2
Joined: 02 Mar 2019, 13:04

Re: Nikon D5200 and LiveView for several displays

Post by lyrri »

It sounds sad. But does it work with Canon's cameras? Or does Canon have the same behaviour as Nikon?
hubaiz
Site Admin
Posts: 2001
Joined: 27 Jan 2015, 18:58

Re: Nikon D5200 and LiveView for several displays

Post by hubaiz »

On Canon after you activate the remote live view you can press the camera LV button and it should display on camera display to.
Post Reply