How to manage USB-tplink connexion and also direct wifi connexion ?

Open discussion about photography, qDslrDashboard
Post Reply
djoubert
Posts: 64
Joined: 24 Feb 2015, 18:22

How to manage USB-tplink connexion and also direct wifi connexion ?

Post by djoubert »

HI,
One more time the opportunity to share that I enjoy dslrdashboard !
So far I use a Canon 1100D and a Canon 6D, both connected to my tplink with an usb hub.
in order to allow the 6D to not be attached with an usb cable ( for instance 10meter far without a 10meter usb cable...)
I am wondering how to manage to have the Canon 6D with his own wifi to be connected to dslrdashboard on my tablet?
- either with two wifi connexion from my tablet?, I dont think that possible ?
- or the TPlink being routing the wifi from the Canon 6D?
in this case what I have to do on the TP-ling parameters ?
Thank you for any help
Dominique
djoubert
Posts: 64
Joined: 24 Feb 2015, 18:22

Re: How to manage USB-tplink connexion and also direct wifi connexion ?

Post by djoubert »

Actually, I succeeded to do what I expected, less difficult thet I thought.
So, in order to share, here are the main steps :
- on the Canon 6D, choose smatphone connexion. / then choose through infrastucture.
- select from the 6D the Tplink DDserver which is in the list of the wifi recognized.
Then as usual from the tablet I connect to the Tplink.
Then I am able to have the Canon 1100D connected on the usb port of the tplink to be seen with the dslrdashboard button : ddserver.
For the canon, it is seen with the button Canon.
Finally I manage the both Canon dslr, as I managed them with the usb hub.
Hoping that could help
Dominique
Post Reply