i use a VoCore2 with OpenWrt Chaos Calmer 15.05.1 r49378 (Kerne 3.18.29)
I am still big steps ahead!
Have the following packages installed manually:
libpthread_0.9.33.2-1_ramips_24kec.ipk
librt_0.9.33.2-1_ramips_24kec.ipk
libusb-1.0_1.0.19-1_ramips_24kec.ipk
uclibcxx_0.2.4-1_ramips_24kec.ipk
usbutils_007-1_ramips_24kec.ipk
zlib_1.2.8-1_ramips_24kec.ipk
After that I was able to install this package:
ddserver_0.2-14_ramips_24kec.ipk
Have the camera (Nikon D800) s.ein HUB and the VoCore2 also to this hub (GND, D +, D-, VCC).
But in the console I only see at lsusb:
Bus 002 Device 001: ID 1d6b: 0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b: 0002 Linux Foundation 2.1 root hub
When I try to connect to qDSLR:
Searching DDServer
DDServer not found, connecting to IP: 192.168.1.1
List connected DSLR at IP: 192.168.1.1
Error getting DSLR list from IP: 192.168.1.1
In the syslog of VoCore:
USB device in
Number of possible configuration 1 Device Class: 9 VendorID: 7531, ProductID: 1
Number of alternate settings:
Interface class: 9 Interface number: 0 Number of endpoints: 1
Number of possible configuration 1 Device Class: 9 VendorID: 7531, ProductID: 2
Number of alternate settings:
Interface class: 9 Interface number: 0 Number of endpoints: 1
Imaging USB devices found: 0
Error reading total packet size: 0
Stopping client
Closing USB device
Can everyone help me?