Hello,
Thank for your software, it's very fun to use.
I'am trying to use it via wifi, so i buy a TL-MR3040. I follow the differents step to flsah firmware with the last version fond on dslrdashboard.info.
When i log to the TL-MR3040, i have the good version of ddserver and it's running.
When i connect my D800 with USB 3 cable on the TL-MR3040, nothing happen.
If i have a look to system.log on the TL-MR3040, i saw that it detect a new high usb device and it says that device not acceot adress xx error -71.
I try with to différent cable and i try to reset the TL-MR3040 and re-flash it in its standar factory and then flash it again with your openWRT firmware, but always the same result. If i look around in menu of TL-MR3040 i saw that it recognise my camera.
I try with a D810 and it's the same way.
Have you an idea ?
Unabled to connect to my D800 with TL-MR3040
Re: Unabled to connect to my D800 with TL-MR3040
Flash factory first
DDServer OpenWrt MR3040 V2 Factory 0.13
Then flash Sysupgrade file
DDServer OpenWrt MR3040 V2 Sysupgrade 0.13
DDServer OpenWrt MR3040 V2 Factory 0.13
Then flash Sysupgrade file
DDServer OpenWrt MR3040 V2 Sysupgrade 0.13