Enabled to connect my D800 to TL-MR3040

[Amaury]

Hello,
Thanks for your soft it's fun.
After playing with it via USB connection, i try to use a TL-MR3040 V2.X
I follow the different steps describe her to flash the FW.
When i log into i can see that ddserver in on and running.
When i connect my D800, nothing happen.
If i read the system log i can see that it detect welle the connection of a new high speed device.
But it says that the device cannot accept adress X error -71.

I've flash the FW to factory then to your openWRT FW, and i've used two different cable and nothing happen.

Have you any idea ?

[cathy]

Flash factory first

DDServer OpenWrt MR3040 V2 Factory 0.13

Then flash Sysupgrade file using update .

DDServer OpenWrt MR3040 V2 Sysupgrade 0.13




Try a long press on the network button the when a ip box comes up click OK .

If you flashed the router and then flashed the update all should work

[Amaury]

Thanks a lot!
It work.
I follow the two step and now it works with my D800 and D810.

[cathy]

That's Great !
Glad to help