Can't click shots while pics are being transferred
Posted: 17 Jul 2016, 15:45
Hi,
Let me start off by saying that I greatly appreciate all the hard work put into developing this excellent software!
I have just recently gone back to photography and tried using the most recent version with my Nikon D750. My notebook is directly connected to the D750's wifi. After each click it takes a couple of seconds for the JPEG version of the photo to be transferred and displayed on the notebook.
I have realized that while the transfer is taking place, the D750 does not allow me to take new shots. Is there anything I can do to work around this? The JPEG quality on the cam is sent to normal so it's not the transfer time I would like to reduce further just have the ability to keep on clicking with the camera and only look at the notebook when and if necessary to review a photo.
Thanks so much for any advice.
Regards,
Dundy
Let me start off by saying that I greatly appreciate all the hard work put into developing this excellent software!
I have just recently gone back to photography and tried using the most recent version with my Nikon D750. My notebook is directly connected to the D750's wifi. After each click it takes a couple of seconds for the JPEG version of the photo to be transferred and displayed on the notebook.
I have realized that while the transfer is taking place, the D750 does not allow me to take new shots. Is there anything I can do to work around this? The JPEG quality on the cam is sent to normal so it's not the transfer time I would like to reduce further just have the ability to keep on clicking with the camera and only look at the notebook when and if necessary to review a photo.
Thanks so much for any advice.
Regards,
Dundy