dslrdashboard.info

I've been using DSLRdashboard to shoot 5 shot brackets and recently I've gotten a lot of brackets that skip an exposure value and duplicate another. I was shooting in aperture priority, so is this from the camera changing it's metering mid bracket? Would shooting full manual prevent this? Is something else causing it? Thanks

Your camera model?
Settings used (aperture, number of over/under exposure, ev step) ?

Same problem here with both Canon 50D and Canon 7D. Tried various combinations of aperture, number of under/over exposure values and ev steps. Results in camera have always been the correct number of total steps but the aperture values and ev steps have been wrong.

Thanks!!!

Tom

tmaugham wrote:Same problem here with both Canon 50D and Canon 7D. Tried various combinations of aperture, number of under/over exposure values and ev steps. Results in camera have always been the correct number of total steps but the aperture values and ev steps have been wrong.

Thanks!!!

Tom

1. What camera exposure mode
2. what BKT mode (in camera, or qDD)

Exposure mode was either AV or Manual (tested several times). Bracketing was in qdd.

Thanks,
Tom

should be fixed in V0.3 beta
This is the last one: https://drive.google.com/file/d/0BxMZ8X ... sp=sharing