Nikon Z6/7

qDslrDashboard feature request, ideas
hubaiz
Site Admin
Posts: 1587
Joined: 27 Jan 2015, 18:58

Re: Nikon Z6/7

Post by hubaiz » 12 Mar 2019, 07:53

Here is a debug version for macOS: https://drive.google.com/file/d/1P4vfNM ... sp=sharing
It will create a qdd_<date_time>.log file in your Documents folder.

dzimmys
Posts: 9
Joined: 15 Dec 2017, 12:07

Re: Nikon Z6/7

Post by dzimmys » 12 Mar 2019, 12:09

Thanx for the help hubaiz i really appreciate it... installed the version you sent, nothing changed the issue remains.. i guess you want me to upload the log file so you can check whats the problem? im not sure.. if this is the case here is the file

https://we.tl/t-nehIYo5Czn

hubaiz
Site Admin
Posts: 1587
Joined: 27 Jan 2015, 18:58

Re: Nikon Z6/7

Post by hubaiz » 12 Mar 2019, 12:43

Thanks, you can send it to the support mail next time.
From the log I see that it tried to connect at utun0 interface and there was no camera.
Can you connect to the Z6 wireless and then in terminal execute the ifconfig command and paste the result here.

dzimmys
Posts: 9
Joined: 15 Dec 2017, 12:07

Re: Nikon Z6/7

Post by dzimmys » 12 Mar 2019, 13:24

heres the result from termiinal

Last login: Tue Mar 12 13:57:20 on console
Jimmys-iMac:~ jimmy$ ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
options=1203<RXCSUM,TXCSUM,TXSTATUS,SW_TIMESTAMP>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
nd6 options=201<PERFORMNUD,DAD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
XHC20: flags=0<> mtu 0
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=10b<RXCSUM,TXCSUM,VLAN_HWTAGGING,AV>
ether 38:c9:86:45:1d:db
nd6 options=201<PERFORMNUD,DAD>
media: autoselect (none)
status: inactive
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 28:f0:76:46:e9:f8
inet6 fe80::104e:2c99:2171:c2ed%en1 prefixlen 64 secured scopeid 0x6
inet 192.168.1.2 netmask 0xffffff00 broadcast 192.168.1.255
nd6 options=201<PERFORMNUD,DAD>
media: autoselect
status: active
p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304
ether 0a:f0:76:46:e9:f8
media: autoselect
status: inactive
awdl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1484
ether 1e:30:05:ca:77:83
inet6 fe80::1c30:5ff:feca:7783%awdl0 prefixlen 64 scopeid 0x8
nd6 options=201<PERFORMNUD,DAD>
media: autoselect
status: active
en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=60<TSO4,TSO6>
ether 1a:00:01:b2:ab:70
media: autoselect <full-duplex>
status: inactive
en3: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=60<TSO4,TSO6>
ether 1a:00:01:b2:ab:71
media: autoselect <full-duplex>
status: inactive
bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=63<RXCSUM,TXCSUM,TSO4,TSO6>
ether 1a:00:01:b2:ab:70
Configuration:
id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0
maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200
root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0
ipfilter disabled flags 0x2
member: en2 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 9 priority 0 path cost 0
member: en3 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 10 priority 0 path cost 0
nd6 options=201<PERFORMNUD,DAD>
media: <unknown type>
status: inactive
utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 2000
inet6 fe80::ef0c:c1a7:c2:6106%utun0 prefixlen 64 scopeid 0xc
nd6 options=201<PERFORMNUD,DAD>
Jimmys-iMac:~ jimmy$

hubaiz
Site Admin
Posts: 1587
Joined: 27 Jan 2015, 18:58

Re: Nikon Z6/7

Post by hubaiz » 12 Mar 2019, 20:53


dzimmys
Posts: 9
Joined: 15 Dec 2017, 12:07

Re: Nikon Z6/7

Post by dzimmys » 13 Mar 2019, 06:19

just sent the file in the support mail..
Last edited by hubaiz on 13 Mar 2019, 07:37, edited 1 time in total.
Reason: removed the email

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests