Windows 10 qDslrDashboard v3.6.4 x86_64 - usbDk USB access
Posted: 01 May 2021, 03:10
Hello,
I have been trying to use qDslrDashboard v3.6.4 x86_64 - under Windows 10 with usbDk USB access. I am using a Canon 5D Mark II with this setup.
I have successfully installed the usbDk drivers from github the latest release build v1.0-22. However, to get them to install I had to put Windows into Test Mode because the drivers are signed with RedHat signature. I can UsbDkController.exe -n and it will list all available USB devices. I can redirect the Canon EOS driver manually fine:
C:\Program Files\UsbDk Runtime Library>UsbDkController.exe -r "USB\VID_04A9&PID_3199" 32000040
Redirect USB device USB\VID_04A9&PID_3199, 32000040
USB device was redirected successfully. Redirected device handle = 000001DDBFC24750
Press any key to stop redirection
But, if I leave the driver redirected and try to click on the USB icon to connect to the usbDk driver it will sit there and state "Searching for USB devices". However, if I stop the redirect and allow qDslrDashboard to try and redirect it will state Connectiong to USB DSLR Canon Inc. Canon Digital Camera loads the usbDk redirect driver and then immediately unloads the usbDk driver and the Canon EOS driver reloads. And, qDslrDashboard never connects to the camera.
I can use the latest build of qDslrDashboard for Android and it will connect to the Canon 5D Mark II just fine.
Thanks for your great product and support!
I have been trying to use qDslrDashboard v3.6.4 x86_64 - under Windows 10 with usbDk USB access. I am using a Canon 5D Mark II with this setup.
I have successfully installed the usbDk drivers from github the latest release build v1.0-22. However, to get them to install I had to put Windows into Test Mode because the drivers are signed with RedHat signature. I can UsbDkController.exe -n and it will list all available USB devices. I can redirect the Canon EOS driver manually fine:
C:\Program Files\UsbDk Runtime Library>UsbDkController.exe -r "USB\VID_04A9&PID_3199" 32000040
Redirect USB device USB\VID_04A9&PID_3199, 32000040
USB device was redirected successfully. Redirected device handle = 000001DDBFC24750
Press any key to stop redirection
But, if I leave the driver redirected and try to click on the USB icon to connect to the usbDk driver it will sit there and state "Searching for USB devices". However, if I stop the redirect and allow qDslrDashboard to try and redirect it will state Connectiong to USB DSLR Canon Inc. Canon Digital Camera loads the usbDk redirect driver and then immediately unloads the usbDk driver and the Canon EOS driver reloads. And, qDslrDashboard never connects to the camera.
I can use the latest build of qDslrDashboard for Android and it will connect to the Canon 5D Mark II just fine.
Thanks for your great product and support!