dslrdashboard.info

I have my Canon R6 connected via wifi to qDSLRdashboard.

The app will function to have the Canon R6 take a photo.
The intervelometer will work to have the Canon R6 take a photo.
But, the itervelometer will not work to have the Canon R6 take a photo if qDSLRdashboard is up and running and connected via wifi to the R6.



I will continue to trouble shoot, but I'm hoping someone can point out what I'm doing wrong.
*note: The shutter button on the camera will also not work to take a photo when the app (qDSLRdashboard) is connected and running.

Thank you,

Eric

Canon R6
qDSLRdashboard V3.6.4

In qDslrDashboard settings check that 'Use Canon local storage' option is disabled.
If it is disabled then try enabling it.

Thanks, that fixed it.

It was disabled, but I enabled it then after it didn't work in that setting, I disabled it. After that it allowed the intervelometer to actuate the camera.

Now to get out there and give it a go.

Thanks again!