Hi,
at first I want to thank you for this absolutely brilliant tool. I use it with my D7100 and D300 on an android and it works absolutely perfect. I now have started testing around the intervalometer build in the LRtimelapse Mode. Unfortunately I do not really understand the way of working for the ramping. As I mostly do timelapse for sunsets, it would be a famous tool if I could programm the dashboard with an increasing curve for the delay, e.g, increase the intervalls each 20 minutes for 2 seconds. So if I start at sunset, every 10 seconds a picture is taken with a bulb time of 1 second and it would be great to end automatically with a delay of 20 seconds and a bulb time of 8 seconds. I can only achieve the opposite (the intervall decreases...)
I have attached a sketch of what I am thinking about. Maybe I do just use the intervalometer not correct?
Feature request: Bulp-ramping decreasing
Feature request: Bulp-ramping decreasing
- Attachments
-
- delay.png (5.49 KiB) Viewed 5937 times
Re: Feature request: Bulp-ramping decreasing
The interval controller I'm working on will allow that.
Re: Feature request: Bulp-ramping decreasing
Hi,
thanks for the Update. In meantime I am curious if there is any progress as there has been nothing new for a while now )
thanks for the Update. In meantime I am curious if there is any progress as there has been nothing new for a while now )