DDserver not found, Android, TP-LINK MR-10U
Posted: 16 Apr 2022, 11:14
Hi, Hubaiz,
Understand this is like a obsolete question as similar threads have been quite for years. I wouldn't be raising this questions hadn't I happened to find a forgotten MR-10U.
System info:
Hostname LEDE
Model TP-Link TL-MR10U v1
Firmware Version LEDE Reboot 17.01.5 r3919-38e704be71 / LuCI lede-17.01 branch (git-18.180.55366-b78664c)
Kernel Version 4.4.140
Installed 2.0-13 version of DDserver on upgraded TP-LINK MR-10U(expanded Rom to 16M and Ram to 64M).
DDserver seen on the page: Systems > Software with the suffix 2.0-13, can also be seen on the page: Systems > Start up with buttons showing Enabled.
Tried Canon 550D and 50DIII with 3 different USB cables connecting them to the router. My PC can control the 2 cameras to take photos via each one of the cables.
Android 3.6.3 version works fine with both cameras when using the same USB cables connecting them with my Android phone.
When JI use the MR-10U trying wireless control, after touching the upper-left corner 3-to-1 hub icon, the app indicates: "searching for DDServer,", then "DDServer not found, connecting to IP 192.168.1.1", then "List connected DSLR at IP: 192.168.1.1", no camera models showed then.
When connecting Canon D550 to the router, the back screen of the camera shows "busy", same as it's connected to a PC.
Plug a USB flash drive on the USB port of the router, it works with the router and the right storage capacity could be showed by using usbutils and WinCP.
Parts of the log here:
Sat Apr 16 18:58:29 2022 kern.info kernel: [ 5784.273104] usb 1-1: new high-speed USB device number 63 using ehci-platform
Sat Apr 16 18:58:29 2022 kern.err kernel: [ 5784.703095] usb 1-1: device descriptor read/64, error -71
Sat Apr 16 18:58:30 2022 kern.err kernel: [ 5785.803208] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
Sat Apr 16 18:58:30 2022 kern.info kernel: [ 5785.923088] usb 1-1: new high-speed USB device number 64 using ehci-platform
Sat Apr 16 18:58:31 2022 kern.err kernel: [ 5786.563069] usb 1-1: device descriptor read/64, error -71
Sat Apr 16 18:58:32 2022 kern.err kernel: [ 5787.273056] usb 1-1: device not accepting address 64, error -71
Sat Apr 16 18:58:32 2022 kern.info kernel: [ 5787.277652] usb usb1-port1: attempt power cycle
Sat Apr 16 18:58:32 2022 daemon.info odhcpd[738]: Using a RA lifetime of 0 seconds on br-lan
Sat Apr 16 18:58:32 2022 kern.info kernel: [ 5787.923103] usb 1-1: new high-speed USB device number 65 using ehci-platform
Sat Apr 16 18:58:33 2022 kern.err kernel: [ 5788.050144] usb 1-1: device descriptor read/8, error -71
Sat Apr 16 18:58:33 2022 kern.err kernel: [ 5788.279138] usb 1-1: device descriptor read/8, error -71
Sat Apr 16 18:58:33 2022 kern.info kernel: [ 5788.723086] usb 1-1: new high-speed USB device number 66 using ehci-platform
Sat Apr 16 18:58:34 2022 kern.err kernel: [ 5789.203032] usb 1-1: device not accepting address 66, error -71
Sat Apr 16 18:58:34 2022 kern.err kernel: [ 5789.207609] usb usb1-port1: unable to enumerate USB device
Sat Apr 16 18:58:34 2022 kern.info kernel: [ 5789.493305] usb 1-1: new high-speed USB device number 67 using ehci-platform
Sat Apr 16 18:58:34 2022 kern.err kernel: [ 5789.739137] usb 1-1: device descriptor read/all, error -71
Sat Apr 16 18:58:35 2022 kern.info kernel: [ 5790.493086] usb 1-1: new high-speed USB device number 68 using ehci-platform
Sat Apr 16 18:58:36 2022 kern.err kernel: [ 5791.093285] usb 1-1: device not accepting address 68, error -71
Sat Apr 16 18:58:36 2022 kern.info kernel: [ 5791.098189] usb usb1-port1: attempt power cycle
Sat Apr 16 18:58:37 2022 kern.err kernel: [ 5792.313072] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
Sat Apr 16 18:58:37 2022 kern.info kernel: [ 5792.433006] usb 1-1: new high-speed USB device number 70 using ehci-platform
Sat Apr 16 18:58:37 2022 kern.err kernel: [ 5792.912984] usb 1-1: device not accepting address 70, error -71
Sat Apr 16 18:58:37 2022 kern.err kernel: [ 5792.917564] usb usb1-port1: unable to enumerate USB device
Sat Apr 16 18:58:38 2022 kern.info kernel: [ 5793.203093] usb 1-1: new high-speed USB device number 71 using ehci-platform
Sat Apr 16 18:58:38 2022 kern.info kernel: [ 5793.445084] usb 1-1: USB disconnect, device number 71
Sat Apr 16 18:58:38 2022 kern.info kernel: [ 5793.723090] usb 1-1: new high-speed USB device number 72 using ehci-platform
I would appreciate if you could help me work out a solution to crack this problem.
Thanks!
Understand this is like a obsolete question as similar threads have been quite for years. I wouldn't be raising this questions hadn't I happened to find a forgotten MR-10U.
System info:
Hostname LEDE
Model TP-Link TL-MR10U v1
Firmware Version LEDE Reboot 17.01.5 r3919-38e704be71 / LuCI lede-17.01 branch (git-18.180.55366-b78664c)
Kernel Version 4.4.140
Installed 2.0-13 version of DDserver on upgraded TP-LINK MR-10U(expanded Rom to 16M and Ram to 64M).
DDserver seen on the page: Systems > Software with the suffix 2.0-13, can also be seen on the page: Systems > Start up with buttons showing Enabled.
Tried Canon 550D and 50DIII with 3 different USB cables connecting them to the router. My PC can control the 2 cameras to take photos via each one of the cables.
Android 3.6.3 version works fine with both cameras when using the same USB cables connecting them with my Android phone.
When JI use the MR-10U trying wireless control, after touching the upper-left corner 3-to-1 hub icon, the app indicates: "searching for DDServer,", then "DDServer not found, connecting to IP 192.168.1.1", then "List connected DSLR at IP: 192.168.1.1", no camera models showed then.
When connecting Canon D550 to the router, the back screen of the camera shows "busy", same as it's connected to a PC.
Plug a USB flash drive on the USB port of the router, it works with the router and the right storage capacity could be showed by using usbutils and WinCP.
Parts of the log here:
Sat Apr 16 18:58:29 2022 kern.info kernel: [ 5784.273104] usb 1-1: new high-speed USB device number 63 using ehci-platform
Sat Apr 16 18:58:29 2022 kern.err kernel: [ 5784.703095] usb 1-1: device descriptor read/64, error -71
Sat Apr 16 18:58:30 2022 kern.err kernel: [ 5785.803208] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
Sat Apr 16 18:58:30 2022 kern.info kernel: [ 5785.923088] usb 1-1: new high-speed USB device number 64 using ehci-platform
Sat Apr 16 18:58:31 2022 kern.err kernel: [ 5786.563069] usb 1-1: device descriptor read/64, error -71
Sat Apr 16 18:58:32 2022 kern.err kernel: [ 5787.273056] usb 1-1: device not accepting address 64, error -71
Sat Apr 16 18:58:32 2022 kern.info kernel: [ 5787.277652] usb usb1-port1: attempt power cycle
Sat Apr 16 18:58:32 2022 daemon.info odhcpd[738]: Using a RA lifetime of 0 seconds on br-lan
Sat Apr 16 18:58:32 2022 kern.info kernel: [ 5787.923103] usb 1-1: new high-speed USB device number 65 using ehci-platform
Sat Apr 16 18:58:33 2022 kern.err kernel: [ 5788.050144] usb 1-1: device descriptor read/8, error -71
Sat Apr 16 18:58:33 2022 kern.err kernel: [ 5788.279138] usb 1-1: device descriptor read/8, error -71
Sat Apr 16 18:58:33 2022 kern.info kernel: [ 5788.723086] usb 1-1: new high-speed USB device number 66 using ehci-platform
Sat Apr 16 18:58:34 2022 kern.err kernel: [ 5789.203032] usb 1-1: device not accepting address 66, error -71
Sat Apr 16 18:58:34 2022 kern.err kernel: [ 5789.207609] usb usb1-port1: unable to enumerate USB device
Sat Apr 16 18:58:34 2022 kern.info kernel: [ 5789.493305] usb 1-1: new high-speed USB device number 67 using ehci-platform
Sat Apr 16 18:58:34 2022 kern.err kernel: [ 5789.739137] usb 1-1: device descriptor read/all, error -71
Sat Apr 16 18:58:35 2022 kern.info kernel: [ 5790.493086] usb 1-1: new high-speed USB device number 68 using ehci-platform
Sat Apr 16 18:58:36 2022 kern.err kernel: [ 5791.093285] usb 1-1: device not accepting address 68, error -71
Sat Apr 16 18:58:36 2022 kern.info kernel: [ 5791.098189] usb usb1-port1: attempt power cycle
Sat Apr 16 18:58:37 2022 kern.err kernel: [ 5792.313072] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
Sat Apr 16 18:58:37 2022 kern.info kernel: [ 5792.433006] usb 1-1: new high-speed USB device number 70 using ehci-platform
Sat Apr 16 18:58:37 2022 kern.err kernel: [ 5792.912984] usb 1-1: device not accepting address 70, error -71
Sat Apr 16 18:58:37 2022 kern.err kernel: [ 5792.917564] usb usb1-port1: unable to enumerate USB device
Sat Apr 16 18:58:38 2022 kern.info kernel: [ 5793.203093] usb 1-1: new high-speed USB device number 71 using ehci-platform
Sat Apr 16 18:58:38 2022 kern.info kernel: [ 5793.445084] usb 1-1: USB disconnect, device number 71
Sat Apr 16 18:58:38 2022 kern.info kernel: [ 5793.723090] usb 1-1: new high-speed USB device number 72 using ehci-platform
I would appreciate if you could help me work out a solution to crack this problem.
Thanks!