Help Please1 Tp-link MR3020 with Canon EOS7D and iPad

[Piccia]

Hello everyone, from many searches on the net I seem to understand that it's possible to set up the MR3020 instead of MR3040 – however, as there is more than one download for the MR3040 it gets really confusing as I have no way of working out which one I should download for the MR3020.

I am trying to make this all work with an iPad4 retina and a Canon EOS 7D. Very grateful for any help, I am stuck.

[hubaiz]

The MR3020 files are avaialble from my Drive share:
factory: https://drive.google.com/file/d/0BxMZ8X ... sp=sharing
sysupgrade: https://drive.google.com/file/d/0BxMZ8X ... sp=sharing

[Piccia]

Thanks so much, that's brilliant. I hope I can work out how to do this – I assume the tutorials for the MR3040 follow the same process?

thanks again!

[hubaiz]

Yes.

[Piccia]

have managed to set the TP link up but nothing happens when I connect it to my 7D. The network is there, my iPad sees it and is connected to it, but when I open qdslrdashboard nothing happens. any idea why? it's latest version of app

thanks in advance.

[hubaiz]

Try and long press the 'Network' button and enter 192.168.1.1 as IP address and press the 'Connect' button

[Piccia]

Sorry, not sure I get what you mean – the network button on the tp-link? which one is that?

[Piccia]

If you are saying that I should enter the IP address somewhere within qslrdashboard, there is no way to do that – I don't get at all the screen in the tutorial video where that can be done.

The cable for the camera works fine because I have tested it.

When the camera is connected to the tp-link, it's on, but kind of dead – no button works.

[Piccia]

this is the screen I get when I open qdslrdashboard on the iPad with the camera connected to the tp-link and the ipad wirelessly connected to the tp-link network.

[hubaiz]

The 'Network' button is the first button from left in the top row.
Long press it and a dialog will open where you can enter the IP.