I'm trying to run the DDserver on my Raspberry Pi.
I tried to follow the steps, in the desscription, but my first Problem was to >make menueconfig... because this file doesn't exists..
Or is this Command only required for the OpenWrt installation?Run then the following commands: "make menuconfig"
Anyways, i continued with installing the Lib.
Code: Select all
sudo apt-get install build-essential pkg-config libusb-1.0-0-dev
Code: Select all
g++ -Wall src/main.cpp src/communicator.cpp `pkg-config --libs --cflags libusb-1.0` -lpthread -lrt -lstdc++ -o ddserver
so i contiuned, (>>chmod +x ddserver), an started the Server: ./ddserver - No output was given.
I connected my NikonD7000 to the Raspberry, wich is wired via Ethernet to my Network.
But the Andriod App isn't displaying anything, when i tap on "Connect to..." (Correct IP, is set)
The Windows app, just says "No Dslr Device found on DDserver 192.168.1.XX"
So, for me it looks like the DDserver cant found the Camera.
Is there any kind of Driver, wich is required?
Regards Peanuts