No Live View Zoom with Nikon Zfc

qDslrDashbord error reports
Post Reply
volkerw
Posts: 4
Joined: 28 Oct 2021, 10:33

No Live View Zoom with Nikon Zfc

Post by volkerw »

Hello!

The Live View Zoom buttons are without any effect using qdslrdashbard v3.6.4 with my new Nikon Zfc. With my other Nikon (Z50) it works fine.

The only workaround is setting it to "camera mode" instead of "host mode" and use the zoom buttons at the camera itself. But after taking a capture, this will be reset to standard (no zoom) and so the liveview zoom is lost again.

So can you please fix this problem and activate the zoom buttons in the qdslrdashbard software? Thank you!

Regards, Volker

hubaiz
Site Admin
Posts: 1955
Joined: 27 Jan 2015, 18:58

Re: No Live View Zoom with Nikon Zfc

Post by hubaiz »

Can you check the USB product ID for the Zfc. Eventually contact me with the support email.

volkerw
Posts: 4
Joined: 28 Oct 2021, 10:33

Re: No Live View Zoom with Nikon Zfc

Post by volkerw »

How can I check this?

volkerw
Posts: 4
Joined: 28 Oct 2021, 10:33

Re: No Live View Zoom with Nikon Zfc

Post by volkerw »

btw, with usb cable it's working fine

hubaiz
Site Admin
Posts: 1955
Joined: 27 Jan 2015, 18:58

Re: No Live View Zoom with Nikon Zfc

Post by hubaiz »

After you connect with USB check the log screen in qDslrDashboard, it should print out.
You could also check in Windows device manager after you connect your camera with USB to your PC

volkerw
Posts: 4
Joined: 28 Oct 2021, 10:33

Re: No Live View Zoom with Nikon Zfc

Post by volkerw »

it doesn't show any

Post Reply