then followed the steps here
Once restarted, type in 192.168.1.1. Now you will have access to the new OpenWrt firmware.
9. Now, in the Open WRT password login. It’ll warn that there is no password. Simply type any password into the password and log into the router.
10. Pick another router password. This will be the admin password.
11. Ignore SSH – Hit Save and Apply
12. Go to System/System
13. Pick Sync with browser to set the time
14. Create a wireless network
15. Click on Network/Wifi
16. Enable the Generic SSID (mine was already enabled)
17. Edit Settings
18. Under ESSID change the name of the network from OpenWRT to whatever you want to call it.
19. Check the LAN button under network.-done
Now switch on the tp link on 3g/4g mode and connected it to nikon D810 and macpro found the wifi name fine and connected to it but the app downloaded from here https://dslrdashboard.info/download/osx-v3-5-3-x64/ opens fine but does not connect to camera and neither tethering works
![Question :?:](./images/smilies/icon_question.gif)