Page 1 of 1
Problems Windows 10 X64, qDSLRDashboard V3.5.1 on TL-MR3040 V1 and Nikon D90
Posted: 07 Jan 2017, 11:56
by kwalter
Hello,
Have problems with the qDSLRDashboard version 3.5.1 on Windows 10 x64.
When I connect my camera Nikon D90 via the TL-MR3040 V1 in LV mode, everything works without problems.
But if I take a picture, the picture is OK, then nothing works no AF etc..
Am I doing something wrong?
Can you please help me?
Best regards
kwalter
Re: Problems Windows 10 X64, qDSLRDashboard V3.5.1 on TL-MR3040 V1 and Nikon D90
Posted: 07 Jan 2017, 12:39
by hubaiz
Please try this newer build:
https://drive.google.com/file/d/0BxMZ8X ... sp=sharing
You will need to use all the files from this archive as this is a newer build. You will also probably need to execute again the vcredist_x64 installer.
Re: Problems Windows 10 X64, qDSLRDashboard V3.5.1 on TL-MR3040 V1 and Nikon D90
Posted: 07 Jan 2017, 13:27
by kwalter
The vcredist_x64 re-installed, but after the program call and the connection to the server on the IP address 192.168.1.1 comes the following error message:
- qDSLRDashboard V3.5.2.jpg (132.05 KiB) Viewed 10339 times
.
what is wrong?
Can you please give me the version for Windows 10 X86?
The program is supposed to run when it works on a tablet running Windows 10 X86.
Best regards
kwalter
Re: Problems Windows 10 X64, qDSLRDashboard V3.5.1 on TL-MR3040 V1 and Nikon D90
Posted: 07 Jan 2017, 13:57
by hubaiz
I can but not right now, will try tomorrow.
Re: Problems Windows 10 X64, qDSLRDashboard V3.5.1 on TL-MR3040 V1 and Nikon D90
Posted: 13 Feb 2017, 07:24
by kwalter
Wait now for more than a month, unfortunately nothing has happened.
Please, can you give me the download link for the qDslrDashboard_V3.5.2_Windows_x86?
Best regards
kwalter
Re: Problems Windows 10 X64, qDSLRDashboard V3.5.1 on TL-MR3040 V1 and Nikon D90
Posted: 13 Feb 2017, 20:19
by hubaiz