Z50 Intervalometer

qDslrDashbord error reports
Post Reply
Andrew_Chan
Posts: 1
Joined: 24 Dec 2022, 05:59

Z50 Intervalometer

Post by Andrew_Chan »

Hello

I have been using the Z50 for astro. After the firmware update to 2.30, the software fails to do "timed exposure" using the bulb mode.

The problem appears when I
1) Enter bulb mode
2) Enter intervalometer
Problem: The "Start" button is now greyed and intervalometer cannot be used

Interestingly, a workaround to this was to
1) Enter intervalometer
2) Choose the desired interval e.g. 2 min and quit the intervalometer
3) Use a default exposure e.g. 30s
4) Enter intervalometer
5) Change into bulb mode using the camera button without quitting the in-app intervalometer

Would it be possible to fix this in a future update?

Thanks,
Andrew
hubaiz
Site Admin
Posts: 2006
Joined: 27 Jan 2015, 18:58

Re: Z50 Intervalometer

Post by hubaiz »

Please can you contact me with the support email?
Post Reply