dslrdashboard.info

Can you maybe make a video that would demonstrate the problem? Where the phone and camera are also visible?

Is maybe BLV enabled (bright live view) ?
When you enable BLV it will remember the current exposure settings.
While enabled when the capture button is pressed it will use the exposure settings that it remembered and after capture it will revert to the exposure values that where set before capture.

Hi, as far as I understand the problem, you will not be able to use the Auto Holy Grail with the camera in Host Mode. Try setting it to Camera Mode and turn off the Dashboard LiveView. It will work while host mode is enabled and with live view enabled but the external interval timer will not be abl...

Is image review enabled in qDD settings? Do you get an image displayed after capture (while not in LRTimelapse screen)?
Did you maybe change the default local images folder in qDD settings?
Can you try and uninstall qDslrDashboard and install it again?

What are the camera settings, can you make a screenshot of that to (second button from top on right side)
You can scale the UI in qDslrDashboard settings with the 'UI scale factor' controls.

I don't see the attached images.

I use this one with my LG G6: https://www.amazon.de/gp/product/B01LNQ ... UTF8&psc=1

So I would say it exists and it is required.

- on you Z7 enable the wireless - connect your Mate 10 wireless to the Z7 wireless - start qDslrDashboard and press the 'Nikon wireless' button - check that your Mate 10 will not automatically change the wireless access point if it detects that there is no internet on current connection - eventually...

For USB connection you need an USB OTG adapter (https://en.wikipedia.org/wiki/USB_On-The-Go).

I would first go with a higher interval for testing , 4 or 5 seconds.
You don't need to go out, just start the interval timer with the camera and qDD.
I would check that the interval timer it isn't putting the camera in focus mode, while the camera is in focus mode qDD can't access the camera.