TL-MR3040 connection problem

[leontsai2002]

Hi

I had the TL-MR3040 V.1 machine and I follow the instruction to flash the firmware into the wifi module

It works but every time I power off and power on the MR-3040 again, I could not connect to the MR-3040 anymore

the only solution I find is to reflash the MR-3040 again

Anyone know why?

[hubaiz]

You don't see the wireless access point ('DDServerAP' by default) ?

[leontsai2002]

I could connect to the DDSeverAP hotspot, but the app just can't connect to the camera.

But if I reflash the MR-3040 software ,the app could connect to the camera and work well.

Sadly, Everytime I power off the MR-3040 and Power it on again, the app just can't connect to the camera anymore...

[hubaiz]

Does it work if you long press the 'Network' button and enter 192.168.1.1 in the upcoming dialog and finally press the 'Ok' button?

[leontsai2002]

No,I did what you say and still could not connect to the camera

But If I reflash the software,short press the network button will connect to the camera right away.........