Nikon D810 Will Not Connect Through TP Link
Posted: 24 Mar 2017, 00:46
I am using a Nikon D810 connected to DslrDashboard through a TP Link. The set up is not working. After the system was set up I logged in and I selected the Nikon button. The following message on my Galaxy s5 appears and nothing else happens: "Connecting to Nikon wireless camera at IP 192.168.1.1". I have tried selecting the network button and it lists connected DSLR at IP 192.168.1.1.
The following procedures were followed to set up the system:
1. I downloaded v2 of the TP Link sw for use with qDslrDashboard;
2. I loaded the sw into the TP link through my iMac using etherlink;
3. I downloaded qDslrDashboard on the phone;
4. I connected to the TP Link wireless through DSLRController (connection sucessful);
5. I connected the TP Link to the D10; and
6. Started qDslrDashboard on the phone and obtained the messages listed above. Nothing else happens int he program.
Any thoughts?
The following procedures were followed to set up the system:
1. I downloaded v2 of the TP Link sw for use with qDslrDashboard;
2. I loaded the sw into the TP link through my iMac using etherlink;
3. I downloaded qDslrDashboard on the phone;
4. I connected to the TP Link wireless through DSLRController (connection sucessful);
5. I connected the TP Link to the D10; and
6. Started qDslrDashboard on the phone and obtained the messages listed above. Nothing else happens int he program.
Any thoughts?